Am Donnerstag, 31. Oktober 2019, 14:30:06 CET schrieb Markus Reichl: > Correct the voltage supplies according to the board schematics > ROC-3399-PC-V10-A-20180804. > > Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx> > --- > .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 30 ++++++++++--------- > 1 file changed, 16 insertions(+), 14 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts > index e06e4163605b..def8bca7d158 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts > @@ -142,7 +142,7 @@ > regulator-boot-on; > regulator-min-microvolt = <3300000>; > regulator-max-microvolt = <3300000>; > - vin-supply = <&vcc_sys>; > + vin-supply = <&dc_12v>; > }; > > /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > @@ -190,7 +190,7 @@ > regulator-boot-on; > regulator-min-microvolt = <800000>; > regulator-max-microvolt = <1400000>; > - vin-supply = <&vcc_sys>; > + vin-supply = <&vcc3v3_sys>; > }; > > /* on roc-rk3399-mezzanine board */ This seems to be some change from somewhere else. In any case I adapted that to the current dts and applied the patch for 5.5. Please double-check though. Thanks Heiko
