Correct the voltage supplies according to the board schematics
ROC-3399-PC-V10-A-20180804.
Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
---
.../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 30 ++++++++++---------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
index e06e4163605b..def8bca7d158 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -142,7 +142,7 @@
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&dc_12v>;
};
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
@@ -190,7 +190,7 @@
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc3v3_sys>;
};
/* on roc-rk3399-mezzanine board */
@@ -283,18 +283,20 @@
rockchip,system-power-controller;
wakeup-source;
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc1v8_pmu>;
+ vcc13-supply = <&vcc3v3_sys>;
+ vcc14-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
regulators {
vdd_center: DCDC_REG1 {
@@ -466,7 +468,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
@@ -485,7 +487,7 @@
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
- vin-supply = <&vcc_sys>;
+ vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
--
2.20.1
