This patch adds documentation of device tree in YAML schema for the OV8856 CMOS image sensor. Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> --- .../devicetree/bindings/media/i2c/ov8856.yaml | 126 +++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml new file mode 100644 index 0000000..a161812 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2019 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings + +maintainers: + - Ben Kao <ben.kao@xxxxxxxxx> + - Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx> + +description: |- + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS + image sensor that delivers 3264x2448 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. This chip is programmable + through I2C and two-wire SCCB. The sensor output is available via CSI-2 + serial data output (up to 4-lane). + +properties: + compatible: + const: ovti,ov8856 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: + Input clock for the sensor. + items: + - const: xvclk + + clock-frequency: + description: + Frequency of the xvclk clock in Hertz. + + dovdd-supply: + description: + Definition of the regulator used as interface power supply. + maxItems: 1 + + avdd-supply: + description: + Definition of the regulator used as analog power supply. + maxItems: 1 + + dvdd-supply: + description: + Definition of the regulator used as digital power supply. + maxItems: 1 + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + maxItems: 1 + + # See ../video-interfaces.txt for details + port: + type: object + additionalProperties: false + + properties: + endpoint: + type: object + + properties: + remote-endpoint: true + data-lanes: true + link-frequencies: true + + required: + - remote-endpoint + - data-lanes + - link-frequencies + + required + - endpoint + +required: + - compatible + - reg + - clocks + - clock-names + - clock-frequency + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + ov8856: camera-sensor@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + reset-gpios = <&pio 111 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&clk_24m_cam>; + + clocks = <&cru SCLK_TESTCLKOUT1>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + avdd-supply = <&mt6358_vcama2_reg>; + dvdd-supply = <&mt6358_vcamd_reg>; + dovdd-supply = <&mt6358_vcamio_reg>; + + port { + wcam_out: endpoint { + remote-endpoint = <&mipi_in_wcam>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <360000000 180000000>; + }; + }; + }; + +... \ No newline at end of file diff --git a/MAINTAINERS b/MAINTAINERS index 296de2b..4cbae26 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12037,6 +12037,7 @@ L: linux-media@xxxxxxxxxxxxxxx T: git git://linuxtv.org/media_tree.git S: Maintained F: drivers/media/i2c/ov8856.c +F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml OMNIVISION OV9650 SENSOR DRIVER M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> -- 2.9.2
