Hi Marco, On Tue, Oct 29, 2019 at 09:55:45AM +0100, Marco Felsch wrote: > Hi Dmitry, > > On 19-10-28 21:12, Dmitry Torokhov wrote: > > On Tue, Oct 29, 2019 at 01:58:04AM +0100, Ondrej Jirman wrote: > > > From: Mylène Josserand <mylene.josserand@xxxxxxxxxxx> > > > > > > Add the support for enabling optional regulator that may be used as VCC > > > source. > > > > > > Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx> > > > Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx> > > > > Applied, thank you. > > What happens with my vdd patches? Sorry for not noticing your patches, I was only aware of Mylène's older series. It looks like you can just skip regulator enable support from your series, and re-send the deep-sleep mechanism and wakeup source patches only. I'll test it with my board, and give you a tested-by. thank you and regards, o. > Regards, > Marco > > > > > > --- > > > drivers/input/touchscreen/edt-ft5x06.c | 30 ++++++++++++++++++++++++++ > > > 1 file changed, 30 insertions(+) > > > > > > diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c > > > index 5525f1fb1526..d61731c0037d 100644 > > > --- a/drivers/input/touchscreen/edt-ft5x06.c > > > +++ b/drivers/input/touchscreen/edt-ft5x06.c > > > @@ -28,6 +28,7 @@ > > > #include <linux/input/mt.h> > > > #include <linux/input/touchscreen.h> > > > #include <asm/unaligned.h> > > > +#include <linux/regulator/consumer.h> > > > > > > #define WORK_REGISTER_THRESHOLD 0x00 > > > #define WORK_REGISTER_REPORT_RATE 0x08 > > > @@ -88,6 +89,7 @@ struct edt_ft5x06_ts_data { > > > struct touchscreen_properties prop; > > > u16 num_x; > > > u16 num_y; > > > + struct regulator *vcc; > > > > > > struct gpio_desc *reset_gpio; > > > struct gpio_desc *wake_gpio; > > > @@ -1036,6 +1038,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) > > > } > > > } > > > > > > +static void edt_ft5x06_disable_regulator(void *arg) > > > +{ > > > + struct edt_ft5x06_ts_data *data = arg; > > > + > > > + regulator_disable(data->vcc); > > > +} > > > + > > > static int edt_ft5x06_ts_probe(struct i2c_client *client, > > > const struct i2c_device_id *id) > > > { > > > @@ -1064,6 +1073,27 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, > > > > > > tsdata->max_support_points = chip_data->max_support_points; > > > > > > + tsdata->vcc = devm_regulator_get(&client->dev, "vcc"); > > > + if (IS_ERR(tsdata->vcc)) { > > > + error = PTR_ERR(tsdata->vcc); > > > + if (error != -EPROBE_DEFER) > > > + dev_err(&client->dev, > > > + "failed to request regulator: %d\n", error); > > > + return error; > > > + } > > > + > > > + error = regulator_enable(tsdata->vcc); > > > + if (error < 0) { > > > + dev_err(&client->dev, "failed to enable vcc: %d\n", error); > > > + return error; > > > + } > > > + > > > + error = devm_add_action_or_reset(&client->dev, > > > + edt_ft5x06_disable_regulator, > > > + tsdata); > > > + if (error) > > > + return error; > > > + > > > tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev, > > > "reset", GPIOD_OUT_HIGH); > > > if (IS_ERR(tsdata->reset_gpio)) { > > > -- > > > 2.23.0 > > > > > > > -- > > Dmitry > > > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |