[PATCH 1/3] input: edt-ft5x06: Add support for regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>

Add the support for enabling optional regulator that may be used as VCC
source.

Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
---
 drivers/input/touchscreen/edt-ft5x06.c | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 5525f1fb1526..d61731c0037d 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -28,6 +28,7 @@
 #include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
 #include <asm/unaligned.h>
+#include <linux/regulator/consumer.h>
 
 #define WORK_REGISTER_THRESHOLD		0x00
 #define WORK_REGISTER_REPORT_RATE	0x08
@@ -88,6 +89,7 @@ struct edt_ft5x06_ts_data {
 	struct touchscreen_properties prop;
 	u16 num_x;
 	u16 num_y;
+	struct regulator *vcc;
 
 	struct gpio_desc *reset_gpio;
 	struct gpio_desc *wake_gpio;
@@ -1036,6 +1038,13 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 	}
 }
 
+static void edt_ft5x06_disable_regulator(void *arg)
+{
+	struct edt_ft5x06_ts_data *data = arg;
+
+	regulator_disable(data->vcc);
+}
+
 static int edt_ft5x06_ts_probe(struct i2c_client *client,
 					 const struct i2c_device_id *id)
 {
@@ -1064,6 +1073,27 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 
 	tsdata->max_support_points = chip_data->max_support_points;
 
+	tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
+	if (IS_ERR(tsdata->vcc)) {
+		error = PTR_ERR(tsdata->vcc);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"failed to request regulator: %d\n", error);
+		return error;
+	}
+
+	error = regulator_enable(tsdata->vcc);
+	if (error < 0) {
+		dev_err(&client->dev, "failed to enable vcc: %d\n", error);
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&client->dev,
+					 edt_ft5x06_disable_regulator,
+					 tsdata);
+	if (error)
+		return error;
+
 	tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
 						     "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(tsdata->reset_gpio)) {
-- 
2.23.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux