On Monday 28 April 2014 19:54:56 Stefan Wahren wrote: > This patch adds the Device tree bindings for the Ethernet over SPI > protocol driver of the Qualcomm QCA7000 HomePlug GreenPHY. > > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> > --- > .../devicetree/bindings/net/qca-qca7000-spi.txt | 51 ++++++++++++++++++++ > 1 file changed, 51 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/qca-qca7000-spi.txt > > diff --git a/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt > new file mode 100644 > index 0000000..132c10f > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/qca-qca7000-spi.txt > @@ -0,0 +1,51 @@ > +* Qualcomm QCA7000 (Ethernet over SPI protocol) > + > +Note: The QCA7000 is useable as a SPI device. In this case it must be defined > +as a child of a spi master in the device tree. > + > +Required properties: > +- compatible : Should be "qca,qca7000" > +- reg : Should specify the SPI chip select > +- intr-gpios : Should specify the GPIO for SPI interrupt > +- spi-cpha : Must be set > +- spi-cpol: Must be set Why specify the interrupt as a GPIO line, rather than an 'interrupts' property? Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html