[PATCH] media: dt-bindings: rcar_vin: Document RZ/G1 per-board settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The R-Car Gen2 per-board settings apply to RZ/G1, too.

Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
 Documentation/devicetree/bindings/media/renesas,vin.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt
index aa217b0962797712..221fcc416d1ac598 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.txt
+++ b/Documentation/devicetree/bindings/media/renesas,vin.txt
@@ -43,7 +43,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
 Additionally, an alias named vinX will need to be created to specify
 which video input device this is.
 
-The per-board settings Gen2 platforms:
+The per-board settings for Gen2 and RZ/G1 platforms:
 
 - port - sub-node describing a single endpoint connected to the VIN
   from external SoC pins as described in video-interfaces.txt[1].
@@ -63,7 +63,7 @@ The per-board settings Gen2 platforms:
     - data-enable-active: polarity of CLKENB signal, see [1] for
       description. Default is active high.
 
-The per-board settings Gen3 and RZ/G2 platforms:
+The per-board settings for Gen3 and RZ/G2 platforms:
 
 Gen3 and RZ/G2 platforms can support both a single connected parallel input
 source from external SoC pins (port@0) and/or multiple parallel input sources
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux