Macronix NANDs support randomizer operation for user data scrambled,
which can be enabled with a SET_FEATURE.
User data written to the NAND device without randomizer is still readable
after randomizer function enabled.
The penalty of randomizer are subpage accesses prohibited and more time
period is needed in program operation and entering deep power-down mode.
i.e., tPROG 300us to 340us(randomizer enabled)
For more high-reliability concern, if subpage write not available with
hardware ECC and then to enable randomizer is recommended by default.
Driver checks byte 167 of Vendor Blocks in ONFI parameter page table
to see if this high-reliability function is supported. By adding a new
specific DT property in children nodes to enable randomizer function.
Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/nand_macronix.c | 69 ++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 58511ae..89101fa 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -11,6 +11,14 @@
#define MACRONIX_READ_RETRY_BIT BIT(0)
#define MACRONIX_NUM_READ_RETRY_MODES 6
+#define MACRONIX_RANDOMIZER_BIT BIT(1)
+#define ONFI_FEATURE_ADDR_MXIC_RANDOMIZER 0xB0
+#define ENPGM BIT(0)
+#define RANDEN BIT(1)
+#define RANDOPT BIT(2)
+#define MACRONIX_RANDOMIZER_MODE_ENTER (ENPGM | RANDEN | RANDOPT)
+#define MACRONIX_RANDOMIZER_MODE_EXIT (RANDEN | RANDOPT)
+
struct nand_onfi_vendor_macronix {
u8 reserved;
u8 reliability_func;
@@ -29,15 +37,76 @@ static int macronix_nand_setup_read_retry(struct nand_chip *chip, int mode)
return nand_set_features(chip, ONFI_FEATURE_ADDR_READ_RETRY, feature);
}
+static int macronix_nand_randomizer_check_enable(struct nand_chip *chip)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN];
+ int ret;
+
+ ret = nand_get_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+ feature);
+ if (ret < 0)
+ return ret;
+
+ if (feature[0])
+ return feature[0];
+
+ feature[0] = MACRONIX_RANDOMIZER_MODE_ENTER;
+ ret = nand_set_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+ feature);
+ if (ret < 0)
+ return ret;
+
+ /* RANDEN and RANDOPT OTP bits are programmed */
+ feature[0] = 0x0;
+ ret = nand_prog_page_op(chip, 0, 0, feature, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = nand_get_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+ feature);
+ if (ret < 0)
+ return ret;
+
+ feature[0] &= MACRONIX_RANDOMIZER_MODE_EXIT;
+ ret = nand_set_features(chip, ONFI_FEATURE_ADDR_MXIC_RANDOMIZER,
+ feature);
+ if (ret < 0)
+ return ret;
+
+ return feature[0];
+}
+
static void macronix_nand_onfi_init(struct nand_chip *chip)
{
struct nand_parameters *p = &chip->parameters;
struct nand_onfi_vendor_macronix *mxic;
+ struct device_node *dn = nand_get_flash_node(chip);
+ int rand_otp = 0;
+ int ret;
if (!p->onfi)
return;
+ if (of_find_property(dn, "mxic,enable-randomizer-otp", NULL))
+ rand_otp = 1;
+
mxic = (struct nand_onfi_vendor_macronix *)p->onfi->vendor;
+ /* Subpage write is prohibited in randomizer operatoin */
+ if (rand_otp && chip->options & NAND_NO_SUBPAGE_WRITE &&
+ mxic->reliability_func & MACRONIX_RANDOMIZER_BIT) {
+ if (p->supports_set_get_features) {
+ bitmap_set(p->set_feature_list,
+ ONFI_FEATURE_ADDR_MXIC_RANDOMIZER, 1);
+ bitmap_set(p->get_feature_list,
+ ONFI_FEATURE_ADDR_MXIC_RANDOMIZER, 1);
+ ret = macronix_nand_randomizer_check_enable(chip);
+ if (ret < 0)
+ pr_info("Macronix NAND randomizer failed\n");
+ else
+ pr_info("Macronix NAND randomizer enabled\n");
+ }
+ }
+
if ((mxic->reliability_func & MACRONIX_READ_RETRY_BIT) == 0)
return;
--
1.9.1
