On Fri, 11 Oct 2019 17:22:14 +0200
Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
> On 19-10-11 17:05, Andreas Kemnade wrote:
> > On Fri, 11 Oct 2019 09:29:27 -0500
> > Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > > On Fri, Oct 11, 2019 at 09:41:48AM +0200, Andreas Kemnade wrote:
> > > > On Fri, 11 Oct 2019 08:56:09 +0200
> > > > Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
> > > >
> > > > > Hi Andreas,
> > > > >
> > > > > On 19-10-10 21:23, Andreas Kemnade wrote:
> > > > > > The Netronix board E60K02 can be found some several Ebook-Readers,
> > > > > > at least the Kobo Clara HD and the Tolino Shine 3. The board
> > > > > > is equipped with different SoCs requiring different pinmuxes.
> > > > > >
> > > > > > For now the following peripherals are included:
> > > > > > - LED
> > > > > > - Power Key
> > > > > > - Cover (gpio via hall sensor)
> > > > > > - RC5T619 PMIC (the kernel misses support for rtc and charger
> > > > > > subdevices).
> > > > > > - Backlight via lm3630a
> > > > > > - Wifi sdio chip detection (mmc-powerseq and stuff)
> > > > > >
> > > > > > It is based on vendor kernel but heavily reworked due to many
> > > > > > changed bindings.
> > > > > >
> > > > > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> > > > > > ---
> > > > > > Changes in v3:
> > > > > > - better led name
> > > > > > - correct memory size
> > > > > > - comments about missing devices
> > > > > >
> > > > > > Changes in v2:
> > > > > > - reordered, was 1/3
> > > > > > - moved pinmuxes to their actual users, not the parents
> > > > > > of them
> > > > > > - removed some already-disabled stuff
> > > > > > - minor cleanups
> > > > >
> > > > > You won't change the muxing, so a this dtsi can be self contained?
> > > > >
> > > > So you want me to put a big
> > > > #if defined(MX6SLL)
> > >
> > > Not sure what the comment meant, but no, don't do this. C defines in dts
> > > files are for symbolic names for numbers and assembling bitfields and
> > > that's it.
> >
> > yes, that is also my opinion. For now, there is only one user
> > of this .dtsi, but I have another one in preparation. That is the
> > reason for splitting things between .dts and .dtsi to avoid such ugly
> > ifdefs
>
> Then IMHO the pnictrl-* entries shouldn't appear in the dsti.
>
hmm, maybe now I understand your idea:
You do not want only to have
pinctrl_lm3630a_bl_gpio: lm3630a_bl_gpio_grp {
fsl,pins = <
MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */
>;
};
in dts, but also do not have these in .dtsi:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
and instead have in dts:
&lm3630a {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
};
just to make sure I get it right before doing the restructuring work. That way of structuring things did not come to my mind, but then the .dtsi is self-contained.
Regards,
Andreas
Attachment:
pgpdssUvv5poK.pgp
Description: OpenPGP digital signature
