On Fri, Oct 11, 2019 at 09:41:48AM +0200, Andreas Kemnade wrote:
> On Fri, 11 Oct 2019 08:56:09 +0200
> Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
>
> > Hi Andreas,
> >
> > On 19-10-10 21:23, Andreas Kemnade wrote:
> > > The Netronix board E60K02 can be found some several Ebook-Readers,
> > > at least the Kobo Clara HD and the Tolino Shine 3. The board
> > > is equipped with different SoCs requiring different pinmuxes.
> > >
> > > For now the following peripherals are included:
> > > - LED
> > > - Power Key
> > > - Cover (gpio via hall sensor)
> > > - RC5T619 PMIC (the kernel misses support for rtc and charger
> > > subdevices).
> > > - Backlight via lm3630a
> > > - Wifi sdio chip detection (mmc-powerseq and stuff)
> > >
> > > It is based on vendor kernel but heavily reworked due to many
> > > changed bindings.
> > >
> > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> > > ---
> > > Changes in v3:
> > > - better led name
> > > - correct memory size
> > > - comments about missing devices
> > >
> > > Changes in v2:
> > > - reordered, was 1/3
> > > - moved pinmuxes to their actual users, not the parents
> > > of them
> > > - removed some already-disabled stuff
> > > - minor cleanups
> >
> > You won't change the muxing, so a this dtsi can be self contained?
> >
> So you want me to put a big
> #if defined(MX6SLL)
Not sure what the comment meant, but no, don't do this. C defines in dts
files are for symbolic names for numbers and assembling bitfields and
that's it.
> [...]
> pinctrl_i2c1: i2c1grp {
> fsl,pins = <
> MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
> MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
> >;
> };
>
> #elif (MX6SL)
> [...]
> pinctrl_i2c1: i2c1grp {
> fsl,pins = <
> MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
> MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
> >;
> };
>
> #endif
> in the dtsi?
>
> Regards,
> Andreas
