This adds documentation about the uart phy to the pn532 binding doc. As
the filename "pn533-i2c.txt" is not appropriate any more, rename it to
the more general "pn532.txt".
This also documents the deprecation of the compatible strings ending
with "...-i2c".
Cc: Johan Hovold <johan@xxxxxxxxxx>
Cc: Simon Horman <horms@xxxxxxxxxxxx>
Signed-off-by: Lars Poeschel <poeschel@xxxxxxxxxxx>
---
Changes in v9:
- Rebased the patch series on v5.4-rc2
- Produce patch with -M4 to git format-patch to detect the rename
- Change DT node name from pn532@24 to nfc@24 in example
Changes in v8:
- Update existing binding doc instead of adding a new one:
- Add uart phy example
- Add general "pn532" compatible string
- Deprecate "...-i2c" compatible strings
- Rename file to a more general filename
- Intentionally drop Rob's Reviewed-By as I guess this rather big change
requires a new review
Changes in v7:
- Accidentally lost Rob's Reviewed-By
Changes in v6:
- Rebased the patch series on v5.3-rc5
- Picked up Rob's Reviewed-By
Changes in v4:
- Add documentation about reg property in case of i2c
Changes in v3:
- seperate binding doc instead of entry in trivial-devices.txt
.../net/nfc/{pn533-i2c.txt => pn532.txt} | 25 ++++++++++++++++---
1 file changed, 21 insertions(+), 4 deletions(-)
rename Documentation/devicetree/bindings/net/nfc/{pn533-i2c.txt => pn532.txt} (42%)
diff --git a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt
similarity index 42%
rename from Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
rename to Documentation/devicetree/bindings/net/nfc/pn532.txt
index 2efe3886b95b..a5507dc499bc 100644
--- a/Documentation/devicetree/bindings/net/nfc/pn533-i2c.txt
+++ b/Documentation/devicetree/bindings/net/nfc/pn532.txt
@@ -1,9 +1,16 @@
* NXP Semiconductors PN532 NFC Controller
Required properties:
-- compatible: Should be "nxp,pn532-i2c" or "nxp,pn533-i2c".
+- compatible: Should be
+ - "nxp,pn532" Place a node with this inside the devicetree node of the bus
+ where the NFC chip is connected to.
+ Currently the kernel has phy bindings for uart and i2c.
+ - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
+ - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
+
+Required properties if connected on i2c:
- clock-frequency: I²C work frequency.
-- reg: address on the bus
+- reg: for the I²C bus address. This is fixed at 0x24 for the PN532.
- interrupts: GPIO interrupt to which the chip is connected
Optional SoC Specific Properties:
@@ -15,9 +22,9 @@ Example (for ARM-based BeagleBone with PN532 on I2C2):
&i2c2 {
- pn532: pn532@24 {
+ pn532: nfc@24 {
- compatible = "nxp,pn532-i2c";
+ compatible = "nxp,pn532";
reg = <0x24>;
clock-frequency = <400000>;
@@ -27,3 +34,13 @@ Example (for ARM-based BeagleBone with PN532 on I2C2):
};
};
+
+Example (for PN532 connected via uart):
+
+uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+
+ pn532: nfc {
+ compatible = "nxp,pn532";
+ };
+};
--
2.23.0
