> -----Original Message----- > From: Shawn Guo <shawnguo@xxxxxxxxxx> > Sent: Monday, October 7, 2019 7:32 AM > To: Wen He <wen.he_1@xxxxxxx> > Cc: linux-devel@xxxxxxxxxxxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>; Rob > Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx > Subject: Re: [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the > Mali DP500 > > On Fri, Sep 20, 2019 at 04:34:18PM +0800, Wen He wrote: > > In order to maximise performance of the LCD Controller's 64-bit AXI > > bus, for any give speed bin of the device, the AXI master interface > > clock(ACLK) clock can be up to CPU_frequency/2, which is already > > capable of optimal performance. In general, ACLK is always expected to > > be equal to CPU_frequency/2. APB slave interface clock(PCLK) and Main > > processing clock(PCLK) both are tied to the same clock as ACLK. > > > > This change followed the LS1028A Architecture Specification Manual. > > > > Signed-off-by: Wen He <wen.he_1@xxxxxxx> > > @Leo, agree? Yes. Acked-by: Li Yang <leoyang.li@xxxxxxx> > > Shawn > > > --- > > change in v2: > > - add details commit description for this change. > > - v1: Link: > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flore > > .kernel.org%2Fpatchwork%2Fpatch%2F1119145%2F&data=02%7C01% > 7Cleoyan > > > g.li%40nxp.com%7C628134d8d86548af60ab08d74b227a54%7C686ea1d3bc2b4 > c6fa9 > > > 2cd99c5c301635%7C0%7C0%7C637060483779667257&sdata=vX2DqsXlKE > SqesXy > > LwTqnBFt0GftY0XNphkmx5dR7vA%3D&reserved=0 > > > > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 ++--------------- > > 1 file changed, 2 insertions(+), 15 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > index 72b9a75976a1..51fa8f57fdac 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > @@ -86,20 +86,6 @@ > > clocks = <&osc_27m>; > > }; > > > > - aclk: clock-axi { > > - compatible = "fixed-clock"; > > - #clock-cells = <0>; > > - clock-frequency = <650000000>; > > - clock-output-names= "aclk"; > > - }; > > - > > - pclk: clock-apb { > > - compatible = "fixed-clock"; > > - #clock-cells = <0>; > > - clock-frequency = <650000000>; > > - clock-output-names= "pclk"; > > - }; > > - > > reboot { > > compatible ="syscon-reboot"; > > regmap = <&dcfg>; > > @@ -679,7 +665,8 @@ > > interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, > > <0 223 IRQ_TYPE_LEVEL_HIGH>; > > interrupt-names = "DE", "SE"; > > - clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>; > > + clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>, > > + <&clockgen 2 2>; > > clock-names = "pxlclk", "mclk", "aclk", "pclk"; > > arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; > > arm,malidp-arqos-value = <0xd000d000>; > > -- > > 2.17.1 > >
