On Mon, 2019-10-07 at 18:10 +0530, Manivannan Sadhasivam wrote: > [External] > > Hi Ardelean, > > On 7 October 2019 3:51:16 PM IST, "Ardelean, Alexandru" < > alexandru.Ardelean@xxxxxxxxxx> wrote: > > On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote: > > > [External] > > > > > > Add devicetree binding for Analog Devices ADUX1020 Photometric > > > sensor. > > > > > > > Hey, > > > > Thanks for the patches. > > > > This dt-binding docs is in text format. > > dt-binding docs now need to be in YAML format. > > > > Sure. I can convert to YAML binding. > > > Also, patches for dt-bindings docs usually come after the driver is > > added. > > So, this patch should be the second in the series, not the first. > > > > I don't think so. The convention is to put dt-bindings patch upfront for > all subsystems. Not sure if IIO differs here. Now that you mention, I'm not sure either. We typically sent the dt-bindings one last, so I assumed it was the default. > > Thanks, > Mani > > Alex > > > > > Signed-off-by: Manivannan Sadhasivam > > <manivannan.sadhasivam@xxxxxxxxxx> > > > --- > > > .../bindings/iio/light/adux1020.txt | 22 > > +++++++++++++++++++ > > > 1 file changed, 22 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/iio/light/adux1020.txt > > > > > > diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > b/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > new file mode 100644 > > > index 000000000000..e896dda30e36 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt > > > @@ -0,0 +1,22 @@ > > > +Analog Devices ADUX1020 Photometric sensor > > > + > > > +Link to datasheet: > > > > > https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf > > > + > > > +Required properties: > > > + > > > + - compatible: should be "adi,adux1020" > > > + - reg: the I2C address of the sensor > > > + > > > +Optional properties: > > > + > > > + - interrupts: interrupt mapping for IRQ as documented in > > > + > > Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > > > + > > > +Example: > > > + > > > +adux1020@64 { > > > + compatible = "adi,adux1020"; > > > + reg = <0x64>; > > > + interrupt-parent = <&msmgpio>; > > > + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; > > > +};
