On Mon, 2019-10-07 at 15:40 +0530, Manivannan Sadhasivam wrote: > [External] > > Add devicetree binding for Analog Devices ADUX1020 Photometric > sensor. > Hey, Thanks for the patches. This dt-binding docs is in text format. dt-binding docs now need to be in YAML format. Also, patches for dt-bindings docs usually come after the driver is added. So, this patch should be the second in the series, not the first. Alex > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > --- > .../bindings/iio/light/adux1020.txt | 22 +++++++++++++++++++ > 1 file changed, 22 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/iio/light/adux1020.txt > > diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.txt > b/Documentation/devicetree/bindings/iio/light/adux1020.txt > new file mode 100644 > index 000000000000..e896dda30e36 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/light/adux1020.txt > @@ -0,0 +1,22 @@ > +Analog Devices ADUX1020 Photometric sensor > + > +Link to datasheet: > https://www.analog.com/media/en/technical-documentation/data-sheets/ADUX1020.pdf > + > +Required properties: > + > + - compatible: should be "adi,adux1020" > + - reg: the I2C address of the sensor > + > +Optional properties: > + > + - interrupts: interrupt mapping for IRQ as documented in > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > + > +Example: > + > +adux1020@64 { > + compatible = "adi,adux1020"; > + reg = <0x64>; > + interrupt-parent = <&msmgpio>; > + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; > +};
