Re: [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250

[Tomasz Figa <tomasz.figa@xxxxxxxxx>]

Hi Chanwoo,

On 25.04.2014 03:16, Chanwoo Choi wrote:
> From: Tomasz Figa <t.figa@xxxxxxxxxxx>
>
> This patch add new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7
> dual core and includes following dt nodes:
>
> - GIC interrupt controller
> - Pinctrl to control GPIOs
> - Clock controller
> - CPU information (Cortex-A7 dual core)
> - UART to support serial port
> - MCT (Multi Core Timer)
> - ADC (Analog Digital Converter)
> - I2C/SPI bus
> - Power domain
> - PMU (Performance Monitoring Unit)
> - MSHC (Mobile Storage Host Controller)
> - PWM (Pluse Width Modulation)
> - AMBA bus
>
> Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
> Signed-off-by: Hyunhee Kim <hyunhee.kim@xxxxxxxxxxx>
> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> Cc: Ben Dooks <ben-linux@xxxxxxxxx>
> Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
>   arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++
>   arch/arm/boot/dts/exynos3250.dtsi         | 405 +++++++++++++
>   arch/arm/boot/dts/exynos4212-tizenw.dts   | 926 ++++++++++++++++++++++++++++++
>   3 files changed, 1808 insertions(+)
>   create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
>   create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
>   create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dts
>
> diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> new file mode 100644
> index 0000000..976490b
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> @@ -0,0 +1,477 @@
> +/*
> + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
> + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/ {
> +	pinctrl@11400000 {

Could you use references instead of re-specifying the whole tree 
hierarchy in every file a node is used?

Instead of

/ {
	pinctrl@11400000 {

	};
};

one may simply use

&pinctrl_0 {

};

You might just need to change the location of #include 
"exynos3250-pinctrl.dtsi" from top of exynos3250.dtsi to bottom of it.

> +		gpa0: gpa0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpa1: gpa1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpb: gpb {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpc0: gpc0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpc1: gpc1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpd0: gpd0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpd1: gpd1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		uart0_data: uart0-data {
> +			samsung,pins = "gpa0-0", "gpa0-1";
> +			samsung,pin-function = <0x2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		uart0_fctl: uart0-fctl {
> +			samsung,pins = "gpa0-2", "gpa0-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		uart1_data: uart1-data {
> +			samsung,pins = "gpa0-4", "gpa0-5";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		uart1_fctl: uart1-fctl {
> +			samsung,pins = "gpa0-6", "gpa0-7";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c2_bus: i2c2-bus {
> +			samsung,pins = "gpa0-6", "gpa0-7";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c3_bus: i2c3-bus {
> +			samsung,pins = "gpa1-2", "gpa1-3";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		spi0_bus: spi0-bus {
> +			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c4_bus: i2c4-bus {
> +			samsung,pins = "gpb-0", "gpb-1";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		spi1_bus: spi1-bus {
> +			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c5_bus: i2c5-bus {
> +			samsung,pins = "gpb-2", "gpb-3";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2s2_bus: i2s2-bus {
> +			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
> +					"gpc1-4";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		pcm2_bus: pcm2-bus {
> +			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
> +					"gpc1-4";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c6_bus: i2c6-bus {
> +			samsung,pins = "gpc1-3", "gpc1-4";
> +			samsung,pin-function = <4>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		pwm0_out: pwm0-out {
> +			samsung,pins = "gpd0-0";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		pwm1_out: pwm1-out {
> +			samsung,pins = "gpd0-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c7_bus: i2c7-bus {
> +			samsung,pins = "gpd0-2", "gpd0-3";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		pwm2_out: pwm2-out {
> +			samsung,pins = "gpd0-2";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		pwm3_out: pwm3-out {
> +			samsung,pins = "gpd0-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c0_bus: i2c0-bus {
> +			samsung,pins = "gpd1-0", "gpd1-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		mipi0_clk: mipi0-clk {
> +			samsung,pins = "gpd1-0", "gpd1-1";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		i2c1_bus: i2c1-bus {
> +			samsung,pins = "gpd1-2", "gpd1-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +	};
> +
> +	pinctrl@11000000 {
> +		gpe0: gpe0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpe1: gpe1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpe2: gpe2 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpk0: gpk0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpk1: gpk1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpk2: gpk2 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpl0: gpl0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpm0: gpm0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpm1: gpm1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpm2: gpm2 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpm3: gpm3 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpm4: gpm4 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpx0: gpx0 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
> +					<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpx1: gpx1 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
> +					<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpx2: gpx2 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		gpx3: gpx3 {
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		sd0_clk: sd0-clk {
> +			samsung,pins = "gpk0-0";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd0_cmd: sd0-cmd {
> +			samsung,pins = "gpk0-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd0_cd: sd0-cd {
> +			samsung,pins = "gpk0-2";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd0_rdqs: sd0-rdqs {
> +			samsung,pins = "gpk0-7";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd0_bus1: sd0-bus-width1 {
> +			samsung,pins = "gpk0-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd0_bus4: sd0-bus-width4 {
> +			samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd0_bus8: sd0-bus-width8 {
> +			samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd1_clk: sd1-clk {
> +			samsung,pins = "gpk1-0";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd1_cmd: sd1-cmd {
> +			samsung,pins = "gpk1-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd1_cd: sd1-cd {
> +			samsung,pins = "gpk1-2";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd1_bus1: sd1-bus-width1 {
> +			samsung,pins = "gpk1-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		sd1_bus4: sd1-bus-width4 {
> +			samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		cam_port_b_io: cam-port-b-io {
> +			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
> +					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
> +					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <3>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		cam_port_b_clk_active: cam-port-b-clk-active {
> +			samsung,pins = "gpm2-2";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		cam_port_b_clk_idle: cam-port-b-clk-idle {
> +			samsung,pins = "gpm2-2";
> +			samsung,pin-function = <0>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		fimc_is_i2c0: fimc-is-i2c0 {
> +			samsung,pins = "gpm4-0", "gpm4-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		fimc_is_i2c1: fimc-is-i2c1 {
> +			samsung,pins = "gpm4-2", "gpm4-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		fimc_is_uart: fimc-is-uart {
> +			samsung,pins = "gpm3-5", "gpm3-7";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> new file mode 100644
> index 0000000..5be3dd3
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -0,0 +1,405 @@
> +/*
> + * Samsung's Exynos3250 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
> + * based board files can include this file and provide values for board specfic
> + * bindings.
> + *
> + * Note: This file does not include device nodes for all the controllers in
> + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
> + * nodes can be added to this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "skeleton.dtsi"
> +#include "exynos3250-pinctrl.dtsi"
> +#include <dt-bindings/clock/exynos3250.h>
> +
> +/ {
> +	compatible = "samsung,exynos3250";
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_0;
> +		pinctrl1 = &pinctrl_1;
> +		mshc0 = &mshc_0;
> +		mshc1 = &mshc_1;
> +		spi0 = &spi_0;
> +		spi1 = &spi_1;
> +		i2c0 = &i2c_0;
> +		i2c1 = &i2c_1;
> +		i2c2 = &i2c_2;
> +		i2c3 = &i2c_3;
> +		i2c4 = &i2c_4;
> +		i2c5 = &i2c_5;
> +		i2c6 = &i2c_6;
> +		i2c7 = &i2c_7;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0>;
> +			clock-frequency = <1000000000>;
> +		};

Why only one CPU? I believe Exynos3250 is dual core. Also are physical 
IDs of the cores really 0 and 1? On Exynos4210 for example they are 
0x900 and 0x901, while on Exynos4212 they are 0xa00 and 0xa01. Please 
check this.

> +	};
> +
> +	fixed-rate-clocks {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		xusbxti: clock@0 {
> +			compatible = "fixed-clock";
> +			reg = <0>;
> +			clock-frequency = <0>;
> +			#clock-cells = <0>;
> +			clock-output-names = "xusbxti";
> +		};
> +
> +		xxti: clock@1 {
> +			compatible = "fixed-clock";
> +			reg = <1>;
> +			clock-frequency = <0>;
> +			#clock-cells = <0>;
> +			clock-output-names = "xxti";
> +		};
> +
> +		xtcxo: clock@2 {
> +			compatible = "fixed-clock";
> +			reg = <2>;
> +			clock-frequency = <0>;
> +			#clock-cells = <0>;
> +			clock-output-names = "xtcxo";
> +		};
> +	};
> +
> +	chipid@10000000 {
> +		compatible = "samsung,exynos4210-chipid";
> +		reg = <0x10000000 0x100>;
> +	};
> +
> +	sys_reg: syscon@10010000 {
> +		compatible = "samsung,exynos3-sysreg", "syscon";
> +		reg = <0x10010000 0x400>;
> +	};
> +
> +	pd_cam: cam-power-domain@10023C00 {
> +		compatible = "samsung,exynos4210-pd";
> +		reg = <0x10023C00 0x20>;
> +	};
> +
> +	pd_mfc: mfc-power-domain@10023C40 {
> +		compatible = "samsung,exynos4210-pd";
> +		reg = <0x10023C40 0x20>;
> +	};
> +
> +	pd_g3d: g3d-power-domain@10023C60 {
> +		compatible = "samsung,exynos4210-pd";
> +		reg = <0x10023C60 0x20>;
> +	};
> +
> +	pd_lcd0: lcd0-power-domain@10023C80 {
> +		compatible = "samsung,exynos4210-pd";
> +		reg = <0x10023C80 0x20>;
> +	};
> +
> +	pd_isp: isp-power-domain@10023CA0 {
> +		compatible = "samsung,exynos4210-pd";
> +		reg = <0x10023CA0 0x20>;
> +	};
> +
> +	cmu: clock-controller@10030000 {
> +		compatible = "samsung,exynos3250-cmu";
> +		reg = <0x10030000 0x20000>;
> +		#clock-cells = <1>;
> +	};
> +
> +	rtc@10070000 {

Please add label to the node, so it can be referenced from board dts 
files added later (using the method I explained above).

> +		compatible = "samsung,s3c6410-rtc";
> +		reg = <0x10070000 0x100>;
> +		interrupts = <0 73 0>, <0 74 0>;
> +		status = "disabled";
> +	};
> +
> +	gic: interrupt-controller@10481000 {
> +		compatible = "arm,cortex-a15-gic";
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		reg = <0x10481000 0x1000>,
> +		      <0x10482000 0x1000>,
> +		      <0x10484000 0x2000>,
> +		      <0x10486000 0x2000>;
> +		      interrupts = <1 9 0xf04>;
> +	};
> +
> +	mct@10050000 {
> +		compatible = "samsung,exynos4210-mct";
> +		reg = <0x10050000 0x800>;
> +		interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
> +			     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
> +		clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
> +		clock-names = "fin_pll", "mct";
> +	};
> +
> +	pinctrl_1: pinctrl@11000000 {
> +		compatible = "samsung,exynos3250-pinctrl";
> +		reg = <0x11000000 0x1000>;
> +		interrupts = <0 225 0>;
> +
> +		wakeup-interrupt-controller {
> +			compatible = "samsung,exynos4210-wakeup-eint";
> +			interrupt-parent = <&gic>;
> +			interrupts = <0 48 0>;
> +		};
> +	};
> +
> +	pinctrl_0: pinctrl@11400000 {
> +		compatible = "samsung,exynos3250-pinctrl";
> +		reg = <0x11400000 0x1000>;
> +		interrupts = <0 240 0>;
> +	};
> +
> +	mshc_0: mshc@12510000 {
> +		compatible = "samsung,exynos5250-dw-mshc";
> +		reg = <0x12510000 0x1000>;
> +		interrupts = <0 142 0>;
> +		clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
> +		clock-names = "biu", "ciu";
> +		fifo-depth = <0x80>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +
> +	mshc_1: mshc@12520000 {
> +		compatible = "samsung,exynos5250-dw-mshc";
> +		reg = <0x12520000 0x1000>;
> +		interrupts = <0 143 0>;
> +		clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
> +		clock-names = "biu", "ciu";
> +		fifo-depth = <0x80>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
> +
> +	amba {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "arm,amba-bus";
> +		interrupt-parent = <&gic>;
> +		ranges;
> +
> +		pdma0: pdma@12680000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x12680000 0x1000>;
> +			interrupts = <0 138 0>;
> +			clocks = <&cmu CLK_PDMA0>;
> +			clock-names = "apb_pclk";
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +		};
> +
> +		pdma1: pdma@12690000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x12690000 0x1000>;
> +			interrupts = <0 139 0>;
> +			clocks = <&cmu CLK_PDMA1>;
> +			clock-names = "apb_pclk";
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +		};
> +	};
> +
> +	adc: adc@126C0000 {
> +		compatible = "samsung,exynos-adc-v3";
> +		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
> +		interrupts = <0 137 0>;
> +		clock-names = "adc", "sclk_tsadc";
> +		clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
> +		#io-channel-cells = <1>;
> +		io-channel-ranges;
> +		status = "disabled";
> +	};
> +
> +	serial@13800000 {

Please add label.

> +		compatible = "samsung,exynos4210-uart";
> +		reg = <0x13800000 0x100>;
> +		interrupts = <0 109 0>;
> +		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
> +		clock-names = "uart", "clk_uart_baud0";
> +		status = "disabled";
> +	};
> +
> +	serial@13810000 {

Ditto.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html