On Fri 04 Oct 04:20 PDT 2019, Kiran Gunda wrote:
> Add support for the PM6150 and PM6150L GPIO support to the
> Qualcomm PMIC GPIO binding.
>
> Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
> drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
> 2 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index c32bf32..2f48cca 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -23,6 +23,8 @@ PMIC's from Qualcomm.
> "qcom,pms405-gpio"
> "qcom,pm8150-gpio"
> "qcom,pm8150b-gpio"
> + "qcom,pm6150-gpio"
> + "qcom,pm6150l-gpio"
>
> And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
> if the device is on an spmi bus or an ssbi bus respectively
> @@ -100,6 +102,8 @@ to specify in a pin configuration subnode:
> and gpio8)
> gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
> gpio1-gpio12 for pm8150l (hole on gpio7)
> + gpio1-gpio10 for pm6150
> + gpio1-gpio12 for pm6150l
>
> - function:
> Usage: required
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index f1fece5..387917c 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct platform_device *pdev)
> { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
> /* pm8150l has 12 GPIOs with holes on 7 */
> { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
> + { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
> + { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
> { },
> };
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
