This series adds support for setting the polarity via DT to the pwm-mxs driver. The DT binding is updated, but I'm not touching the existing .dts or .dtsi files - it seems that the same was done for bcm2835 in commits 46421d9d8e802e570dfa4d793a4938d2642ec7a7 and 8a88b2a2017d1e7e80db53080baff591fd454722, while arch/arm/boot/dts/bcm283x.dtsi still has #pwm-cells = <2>. v2: - Rebase to v5.4-rc1 - Address comments from Uwe. - Add Rob's ack to patch 4. - New patches 5 and 6. The last one is independent of the others, but I stumbled on this when rebasing and found the signature had changed. Rasmus Villemoes (6): pwm: mxs: implement ->apply pwm: mxs: remove legacy methods pwm: mxs: add support for inverse polarity dt-bindings: pwm: mxs-pwm: Increase #pwm-cells pwm: mxs: avoid a division in mxs_pwm_apply() pwm: update comment on struct pwm_ops::apply .../devicetree/bindings/pwm/mxs-pwm.txt | 4 +- drivers/pwm/pwm-mxs.c | 101 +++++++++--------- include/linux/pwm.h | 5 +- 3 files changed, 53 insertions(+), 57 deletions(-) -- 2.20.1
