The plan for the HiHope RZ/G2N board is to enable pciec0 by default,
and use pciec1 physical interface for SATA (as SATA and PCIE1 share
the same physical interface), therefore move pciec1 enabling away
from hihope-rzg2-ex.
Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 4 ----
arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts | 4 ++++
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index ae1ef2d..63e407a 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -85,10 +85,6 @@
status = "okay";
};
-&pciec1 {
- status = "okay";
-};
-
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
index 6e33a3b..c754fca 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -13,3 +13,7 @@
compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
"renesas,r8a774a1";
};
+
+&pciec1 {
+ status = "okay";
+};
--
2.7.4
