Hi Krzysztof,
On 23.09.2019 18:14, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos Soc Multi Core Timer bindings to DT schema format
> using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> ---
>
> Changes since v3:
> 1. Use interrupts-extended instead of interrupts-map.
>
> Changes since v1:
> 1. Indent example with four spaces (more readable),
> 2. Rename nodes in example to timer,
> 3. Remove mct-map subnode.
> ---
> .../bindings/timer/samsung,exynos4210-mct.txt | 88 ------------
> .../timer/samsung,exynos4210-mct.yaml | 125 ++++++++++++++++++
> 2 files changed, 125 insertions(+), 88 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
>
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> deleted file mode 100644
> index 8f78640ad64c..000000000000
> --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -Samsung's Multi Core Timer (MCT)
> -
> -The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> -global timer and CPU local timers. The global timer is a 64-bit free running
> -up-counter and can generate 4 interrupts when the counter reaches one of the
> -four preset counter values. The CPU local timers are 32-bit free running
> -down-counters and generate an interrupt when the counter expires. There is
> -one CPU local timer instantiated in MCT for every CPU in the system.
> -
> -Required properties:
> -
> -- compatible: should be "samsung,exynos4210-mct".
> - (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
> - (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
> -
> -- reg: base address of the mct controller and length of the address space
> - it occupies.
> -
> -- interrupts: the list of interrupts generated by the controller. The following
> - should be the order of the interrupts specified. The local timer interrupts
> - should be specified after the four global timer interrupts have been
> - specified.
> -
> - 0: Global Timer Interrupt 0
> - 1: Global Timer Interrupt 1
> - 2: Global Timer Interrupt 2
> - 3: Global Timer Interrupt 3
> - 4: Local Timer Interrupt 0
> - 5: Local Timer Interrupt 1
> - 6: ..
> - 7: ..
> - i: Local Timer Interrupt n
> -
> - For MCT block that uses a per-processor interrupt for local timers, such
> - as ones compatible with "samsung,exynos4412-mct", only one local timer
> - interrupt might be specified, meaning that all local timers use the same
> - per processor interrupt.
> -
> -Example 1: In this example, the IP contains two local timers, using separate
> - interrupts, so two local timer interrupts have been specified,
> - in addition to four global timer interrupts.
> -
> - mct@10050000 {
> - compatible = "samsung,exynos4210-mct";
> - reg = <0x10050000 0x800>;
> - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> - <0 42 0>, <0 48 0>;
> - };
> -
> -Example 2: In this example, the timer interrupts are connected to two separate
> - interrupt controllers. Hence, an interrupt-map is created to map
> - the interrupts to the respective interrupt controllers.
> -
> - mct@101c0000 {
> - compatible = "samsung,exynos4210-mct";
> - reg = <0x101C0000 0x800>;
> - interrupt-parent = <&mct_map>;
> - interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
> -
> - mct_map: mct-map {
> - #interrupt-cells = <1>;
> - #address-cells = <0>;
> - #size-cells = <0>;
> - interrupt-map = <0 &gic 0 57 0>,
> - <1 &gic 0 69 0>,
> - <2 &combiner 12 6>,
> - <3 &combiner 12 7>,
> - <4 &gic 0 42 0>,
> - <5 &gic 0 48 0>;
> - };
> - };
> -
> -Example 3: In this example, the IP contains four local timers, but using
> - a per-processor interrupt to handle them. Either all the local
> - timer interrupts can be specified, with the same interrupt specifier
> - value or just the first one.
> -
> - mct@10050000 {
> - compatible = "samsung,exynos4412-mct";
> - reg = <0x10050000 0x800>;
> -
> - /* Both ways are possible in this case. Either: */
> - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> - <0 42 0>;
> - /* or: */
> - interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> - <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
> - };
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> new file mode 100644
> index 000000000000..bff3f54a398f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> @@ -0,0 +1,125 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC Multi Core Timer (MCT)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +
> +description: |+
> + The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
> + global timer and CPU local timers. The global timer is a 64-bit free running
> + up-counter and can generate 4 interrupts when the counter reaches one of the
> + four preset counter values. The CPU local timers are 32-bit free running
> + down-counters and generate an interrupt when the counter expires. There is
> + one CPU local timer instantiated in MCT for every CPU in the system.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,exynos4210-mct
> + - samsung,exynos4412-mct
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + description: |
> + Interrupts should be put in specific order. This is, the local timer
> + interrupts should be specified after the four global timer interrupts
> + have been specified:
> + 0: Global Timer Interrupt 0
> + 1: Global Timer Interrupt 1
> + 2: Global Timer Interrupt 2
> + 3: Global Timer Interrupt 3
> + 4: Local Timer Interrupt 0
> + 5: Local Timer Interrupt 1
> + 6: ..
> + 7: ..
> + i: Local Timer Interrupt n
> + For MCT block that uses a per-processor interrupt for local timers, such
> + as ones compatible with "samsung,exynos4412-mct", only one local timer
> + interrupt might be specified, meaning that all local timers use the same
> + per processor interrupt.
> + minItems: 5 # 4 Global + 1 local
> + maxItems: 20 # 4 Global + 16 local
> +
> + interrupts-extended:
> + description: |
> + If interrupts are coming from different controllers, this property
> + can be used instead of regular "interrupts" property.
> + The format is exactly the same as with "interrupts".
> + Interrupts should be put in specific order. This is, the local timer
> + minItems: 5 # 4 Global + 1 local
> + maxItems: 20 # 4 Global + 16 local
> +
> +required:
> + - compatible
> + - interrupts
> + - reg
> +
> +allOf:
> + - if:
> + not:
> + required:
> + - interrupts
> + then:
> + required:
> + - interrupts-extended
> +
> +examples:
> + - |
> + // In this example, the IP contains two local timers, using separate
> + // interrupts, so two local timer interrupts have been specified,
> + // in addition to four global timer interrupts.
> +
> + timer@10050000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x10050000 0x800>;
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>, <0 48 0>;
> + };
> +
> + - |
> + // In this example, the timer interrupts are connected to two separate
> + // interrupt controllers. Hence, an interrupts-extended is needed.
> +
> + timer@101c0000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x101C0000 0x800>;
> + interrupts-extended = <&gic 0 57 0>,
> + <&gic 0 69 0>,
> + <&combiner 12 6>,
> + <&combiner 12 7>,
> + <&gic 0 42 0>,
> + <&gic 0 48 0>;
> + };
> +
> + - |
> + // In this example, the IP contains four local timers, but using
> + // a per-processor interrupt to handle them. Only one first local
> + // interrupt is specified.
> +
> + timer@10050000 {
> + compatible = "samsung,exynos4412-mct";
> + reg = <0x10050000 0x800>;
> +
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>;
> + };
> +
> + - |
> + // In this example, the IP contains four local timers, but using
> + // a per-processor interrupt to handle them. All the local timer
> + // interrupts are specified.
> +
> + timer@10050000 {
> + compatible = "samsung,exynos4412-mct";
> + reg = <0x10050000 0x800>;
> +
> + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
> + <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
> + };
I would add "#include <dt-bindings/interrupt-controller/arm-gic.h>" and
replace zeros with proper defines like GIC_SPI and GIC_PPI. The last two
examples describes per-processor-interrupts, but have 0 in the specifier
cell 0. I would also use proper IRQ_TYPE_LEVEL_HIGH at cell 3 instead
of 0. I would also consider adding artificial 'interrupt-parent = &git'
property to the 1st, 3rd and 4th examples to make it clear that they
refer to ARM GIC bindings.
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
