Re: [PATCH 0/6] Add the Mobiveil EP and Layerscape Gen4 EP driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 24, 2019 at 03:18:47PM +0100, Russell King - ARM Linux admin wrote:
> On Mon, Sep 16, 2019 at 10:17:36AM +0800, Xiaowei Bao wrote:
> > This patch set are for adding Mobiveil EP driver and adding PCIe Gen4
> > EP driver of NXP Layerscape platform.
> > 
> > This patch set depends on:
> > https://patchwork.kernel.org/project/linux-pci/list/?series=159139
> > 
> > Xiaowei Bao (6):
> >   PCI: mobiveil: Add the EP driver support
> >   dt-bindings: Add DT binding for PCIE GEN4 EP of the layerscape
> >   PCI: mobiveil: Add PCIe Gen4 EP driver for NXP Layerscape SoCs
> >   PCI: mobiveil: Add workaround for unsupported request error
> >   arm64: dts: lx2160a: Add PCIe EP node
> >   misc: pci_endpoint_test: Add the layerscape PCIe GEN4 EP device
> >     support
> > 
> >  .../bindings/pci/layerscape-pcie-gen4.txt          |  28 +-
> >  MAINTAINERS                                        |   3 +
> >  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi     |  56 ++
> >  drivers/misc/pci_endpoint_test.c                   |   2 +
> >  drivers/pci/controller/mobiveil/Kconfig            |  22 +-
> >  drivers/pci/controller/mobiveil/Makefile           |   2 +
> >  .../controller/mobiveil/pcie-layerscape-gen4-ep.c  | 169 ++++++
> >  drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c | 568 +++++++++++++++++++++
> >  drivers/pci/controller/mobiveil/pcie-mobiveil.c    |  99 +++-
> >  drivers/pci/controller/mobiveil/pcie-mobiveil.h    |  72 +++
> >  10 files changed, 1009 insertions(+), 12 deletions(-)
> >  create mode 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> >  create mode 100644 drivers/pci/controller/mobiveil/pcie-mobiveil-ep.c
> 
> Hi,
> 
> I've applied "PCI: mobiveil: Fix the CPU base address setup in inbound
> window" and your patch set to 5.3, which seems to be able to detect the
> PCIe card I have plugged in:
> 
> layerscape-pcie-gen4 3800000.pcie: host bridge /soc/pcie@3800000 ranges:
> layerscape-pcie-gen4 3800000.pcie:   MEM 0xa040000000..0xa07fffffff -> 0x40000000
> layerscape-pcie-gen4 3800000.pcie: PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [bus 00-ff]
> pci_bus 0000:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address
> [0x40000000-0x7fffffff])
> pci 0000:00:00.0: [1957:8d90] type 01 class 0x060400
> pci 0000:00:00.0: enabling Extended Tags
> pci 0000:00:00.0: supports D1 D2
> pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:01:00.0: [15b3:6750] type 00 class 0x020000
> pci 0000:01:00.0: reg 0x10: [mem 0xa040000000-0xa0400fffff 64bit]
> pci 0000:01:00.0: reg 0x18: [mem 0xa040800000-0xa040ffffff 64bit pref]
> pci 0000:01:00.0: reg 0x30: [mem 0xa041000000-0xa0410fffff pref]
> pci 0000:00:00.0: up support 3 enabled 0
> pci 0000:00:00.0: dn support 1 enabled 0
> pci 0000:00:00.0: BAR 9: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:00:00.0: BAR 8: assigned [mem 0xa040800000-0xa0409fffff]
> pci 0000:01:00.0: BAR 2: assigned [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:01:00.0: BAR 0: assigned [mem 0xa040800000-0xa0408fffff 64bit]
> pci 0000:01:00.0: BAR 6: assigned [mem 0xa040900000-0xa0409fffff pref]
> pci 0000:00:00.0: PCI bridge to [bus 01-ff]
> pci 0000:00:00.0:   bridge window [mem 0xa040800000-0xa0409fffff]
> pci 0000:00:00.0:   bridge window [mem 0xa040000000-0xa0407fffff 64bit pref]
> pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256pcieport 0000:00:00.0: PCIe capabilities: 0x13
> pcieport 0000:00:00.0: init_service_irqs: -19
> 
> However, a bit later in the kernel boot, I get:
> 
> SError Interrupt on CPU1, code 0xbf000002 -- SError
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> pstate: 60400085 (nZCv daIf +PAN -UAO)
> pc : pci_generic_config_read+0xb0/0xc0
> lr : pci_generic_config_read+0x1c/0xc0
> sp : ffffff8010f9baf0
> x29: ffffff8010f9baf0 x28: ffffff8010d620a0
> x27: ffffff8010d79000 x26: ffffff8010d62000
> x25: ffffff8010cb06d4 x24: 0000000000000000
> x23: ffffff8010e499b8 x22: ffffff8010f9bbaf
> x21: 0000000000000000 x20: ffffffe2eda11800
> x19: ffffff8010f62158 x18: ffffff8010bdede0
> x17: ffffff8010bdede8 x16: ffffff8010b96970
> x15: ffffffffffffffff x14: ffffffffff000000
> x13: ffffffffffffffff x12: 0000000000000030
> x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
> x9 : 2dff716475687163 x8 : ffffffffffffffff
> x7 : fefefefefefefefe x6 : 0000000000000000
> x5 : 0000000000000000 x4 : ffffff8010f9bb6c
> x3 : 0000000000000001 x2 : 0000000000000003
> x1 : 0000000000000000 x0 : 0000000000000000
> Kernel panic - not syncing: Asynchronous SError Interrupt
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0+ #392
> Hardware name: SolidRun LX2160A COM express type 7 module (DT)
> Call trace:
>  dump_backtrace+0x0/0x120
>  show_stack+0x14/0x1c
>  dump_stack+0x9c/0xc0
>  panic+0x148/0x34c
>  print_tainted+0x0/0xa8
>  arm64_serror_panic+0x74/0x80
>  do_serror+0x8c/0x13c
>  el1_error+0xbc/0x160
>  pci_generic_config_read+0xb0/0xc0
>  pci_bus_read_config_byte+0x64/0x90
>  pci_read_config_byte+0x40/0x48
>  pci_assign_irq+0x34/0xc8
>  pci_device_probe+0x28/0x148
>  really_probe+0x1c4/0x2d0
>  driver_probe_device+0x58/0xfc
>  device_driver_attach+0x68/0x70
>  __driver_attach+0x94/0xdc
>  bus_for_each_dev+0x50/0xa0
>  driver_attach+0x20/0x28
>  bus_add_driver+0x14c/0x200
>  driver_register+0x6c/0x124
>  __pci_register_driver+0x48/0x50
>  mlx4_init+0x154/0x180
>  do_one_initcall+0x30/0x250
>  kernel_init_freeable+0x23c/0x32c
>  kernel_init+0x10/0xfc
>  ret_from_fork+0x10/0x18
> SMP: stopping secondary CPUs
> Kernel Offset: disabled
> CPU features: 0x0002,21006008
> Memory Limit: none
> 
> and there it dies.  Any ideas?

The failing access seems to be:

        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);

for the Mellanox Ethernet card.  Presumably, being a PCIe ethernet
card, it doesn't implement this register (just a guess), and aborts
the PCI transaction, which is presumably triggering the above SError.

Note that I've used this card with the Macchiatobin (Armada 8040)
without issue.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux