Currently the driver don't support pm_ops. These ops are not necessary
if the supply isn't switchable (always on). This assumptions seems to be
wrong because no one needs a powered hub during suspend-to-ram/disk.
So adding simple_dev_pm_ops to be able to switch off the hub during
suspend and to restore the config after a resume operation.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
drivers/usb/misc/usb251xb.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index bc031d33f433..5bba19937da1 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -701,6 +701,29 @@ static int usb251xb_i2c_probe(struct i2c_client *i2c,
return usb251xb_probe(hub);
}
+static int __maybe_unused usb251xb_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb251xb *hub = i2c_get_clientdata(client);
+
+ return regulator_disable(hub->vdd);
+}
+
+static int __maybe_unused usb251xb_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb251xb *hub = i2c_get_clientdata(client);
+ int err;
+
+ err = regulator_enable(hub->vdd);
+ if (err)
+ return err;
+
+ return usb251xb_connect(hub);
+}
+
+static SIMPLE_DEV_PM_OPS(usb251xb_pm_ops, usb251xb_suspend, usb251xb_resume);
+
static const struct i2c_device_id usb251xb_id[] = {
{ "usb2512b", 0 },
{ "usb2512bi", 0 },
@@ -718,6 +741,7 @@ static struct i2c_driver usb251xb_i2c_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(usb251xb_of_match),
+ .pm = &usb251xb_pm_ops,
},
.probe = usb251xb_i2c_probe,
.id_table = usb251xb_id,
--
2.20.1
