Hi Benoit,
On Thu, Sep 12, 2019 at 1:58 PM Benoit Parrot <bparrot@xxxxxx> wrote:
>
> On some board it is possible that the sensor 'powerdown'
> pin might be controlled with a gpio instead of being
> tied to always powered.
>
> This patch add support to specify an optional gpio
> which will be set at probe time and remained on.
>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
> drivers/media/i2c/Kconfig | 2 +-
> drivers/media/i2c/ov2659.c | 13 +++++++++++++
> 2 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 7eee1812bba3..315c1d8bdb7b 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -634,7 +634,7 @@ config VIDEO_OV2640
> config VIDEO_OV2659
> tristate "OmniVision OV2659 sensor support"
> depends on VIDEO_V4L2 && I2C
> - depends on MEDIA_CAMERA_SUPPORT
> + depends on MEDIA_CAMERA_SUPPORT && GPIOLIB
> select V4L2_FWNODE
> help
> This is a Video4Linux2 sensor driver for the OmniVision
> diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
> index efbe6dc720e2..c64f73bef336 100644
> --- a/drivers/media/i2c/ov2659.c
> +++ b/drivers/media/i2c/ov2659.c
> @@ -32,6 +32,8 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_graph.h>
> +#include <linux/of_gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/slab.h>
> #include <linux/uaccess.h>
> #include <linux/videodev2.h>
> @@ -232,6 +234,8 @@ struct ov2659 {
> struct sensor_register *format_ctrl_regs;
> struct ov2659_pll_ctrl pll;
> int streaming;
> + /* used to control the sensor powerdownN pin */
> + struct gpio_desc *pwrdn_gpio;
> };
>
> static const struct sensor_register ov2659_init_regs[] = {
> @@ -1391,6 +1395,7 @@ static int ov2659_probe(struct i2c_client *client)
> struct v4l2_subdev *sd;
> struct ov2659 *ov2659;
> struct clk *clk;
> + struct gpio_desc *gpio;
you don't need the local var here you can just assign it directly to pwrdn_gpio.
> int ret;
>
> if (!pdata) {
> @@ -1414,6 +1419,14 @@ static int ov2659_probe(struct i2c_client *client)
> ov2659->xvclk_frequency > 27000000)
> return -EINVAL;
>
> + /* Optional gpio don't fail if not present */
> + gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(gpio))
> + return PTR_ERR(gpio);
> +
> + ov2659->pwrdn_gpio = gpio;
> +
apart from assigning it you don't actually use it.
you will also have to read the reset gpio pin and implement
ov2659_set_power() and
call it in appropriate places/ s_power ?
Cheers,
--Prabhakar Lad
