Convert Samsung S3C/S5P/Exynos watchdog bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
.../bindings/watchdog/samsung-wdt.txt | 35 ----------
.../bindings/watchdog/samsung-wdt.yaml | 69 +++++++++++++++++++
2 files changed, 69 insertions(+), 35 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
deleted file mode 100644
index 46dcb48e75b4..000000000000
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Samsung's Watchdog Timer Controller
-
-The Samsung's Watchdog controller is used for resuming system operation
-after a preset amount of time during which the WDT reset event has not
-occurred.
-
-Required properties:
-- compatible : should be one among the following
- - "samsung,s3c2410-wdt" for S3C2410
- - "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4
- - "samsung,exynos5250-wdt" for Exynos5250
- - "samsung,exynos5420-wdt" for Exynos5420
- - "samsung,exynos7-wdt" for Exynos7
-
-- reg : base physical address of the controller and length of memory mapped
- region.
-- interrupts : interrupt number to the cpu.
-- samsung,syscon-phandle : reference to syscon node (This property required only
- in case of compatible being "samsung,exynos5250-wdt" or "samsung,exynos5420-wdt".
- In case of Exynos5250 and 5420 this property points to syscon node holding the PMU
- base address)
-
-Optional properties:
-- timeout-sec : contains the watchdog timeout in seconds.
-
-Example:
-
-watchdog@101d0000 {
- compatible = "samsung,exynos5250-wdt";
- reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
- clocks = <&clock 336>;
- clock-names = "watchdog";
- samsung,syscon-phandle = <&pmu_syscon>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
new file mode 100644
index 000000000000..39f1ca3bc4db
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/samsung-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC Watchdog Timer Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
+
+description: |+
+ The Samsung's Watchdog controller is used for resuming system operation
+ after a preset amount of time during which the WDT reset event has not
+ occurred.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c2410-wdt # for S3C2410
+ - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4
+ - samsung,exynos5250-wdt # for Exynos5250
+ - samsung,exynos5420-wdt # for Exynos5420
+ - samsung,exynos7-wdt # for Exynos7
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ samsung,syscon-phandle:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description:
+ Phandle to the PMU system controller node (in case of Exynos5250
+ and Exynos5420).
+
+ timeout-sec:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Watchdog timeout in seconds.
+
+required:
+ - compatible
+ - interrupts
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos5250-wdt
+ - samsung,exynos5420-wdt
+ then:
+ required:
+ - samsung,syscon-phandle
+
+examples:
+ - |
+ watchdog@101d0000 {
+ compatible = "samsung,exynos5250-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ clocks = <&clock 336>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_syscon>;
+ };
--
2.17.1
