> -----Original Message-----
> From: Andrew Murray <andrew.murray@xxxxxxx>
> Sent: 2019年9月2日 21:06
> To: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; Leo
> Li <leoyang.li@xxxxxxx>; kishon@xxxxxx; lorenzo.pieralisi@xxxxxxx; M.h.
> Lian <minghuan.lian@xxxxxxx>; Mingkai Hu <mingkai.hu@xxxxxxx>; Roy
> Zang <roy.zang@xxxxxxx>; jingoohan1@xxxxxxxxx;
> gustavo.pimentel@xxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx;
> arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; Z.q. Hou
> <zhiqiang.hou@xxxxxxx>
> Subject: Re: [PATCH v3 10/11] arm64: dts: layerscape: Add PCIe EP node for
> ls1088a
>
> On Mon, Sep 02, 2019 at 11:17:15AM +0800, Xiaowei Bao wrote:
> > Add PCIe EP node for ls1088a to support EP mode.
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> > ---
> > v2:
> > - Remove the pf-offset proparty.
> > v3:
> > - No change.
> >
> > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 31
> ++++++++++++++++++++++++++
> > 1 file changed, 31 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > index c676d07..da246ab 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > @@ -483,6 +483,17 @@
> > status = "disabled";
> > };
> >
> > + pcie_ep@3400000 {
> > + compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
>
> Here you specify a fallback "fsl,ls-pcie-ep" that is removed by this series.
>
> Besides that, this looks OK.
As explained, the "fsl,ls-pcie-ep" is needed, due to the u-boot will fixup the status
property base on this compatible, I think we reserve this compatible is helpfully,
if delate this compatible, I have to modify the code of bootloader.
Thanks
XIaowei
>
> Thanks,
>
> Andrew Murray
>
> > + reg = <0x00 0x03400000 0x0 0x00100000
> > + 0x20 0x00000000 0x8 0x00000000>;
> > + reg-names = "regs", "addr_space";
> > + num-ib-windows = <24>;
> > + num-ob-windows = <128>;
> > + max-functions = /bits/ 8 <2>;
> > + status = "disabled";
> > + };
> > +
> > pcie@3500000 {
> > compatible = "fsl,ls1088a-pcie";
> > reg = <0x00 0x03500000 0x0 0x00100000 /* controller
> registers */
> > @@ -508,6 +519,16 @@
> > status = "disabled";
> > };
> >
> > + pcie_ep@3500000 {
> > + compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> > + reg = <0x00 0x03500000 0x0 0x00100000
> > + 0x28 0x00000000 0x8 0x00000000>;
> > + reg-names = "regs", "addr_space";
> > + num-ib-windows = <6>;
> > + num-ob-windows = <8>;
> > + status = "disabled";
> > + };
> > +
> > pcie@3600000 {
> > compatible = "fsl,ls1088a-pcie";
> > reg = <0x00 0x03600000 0x0 0x00100000 /* controller
> registers */
> > @@ -533,6 +554,16 @@
> > status = "disabled";
> > };
> >
> > + pcie_ep@3600000 {
> > + compatible = "fsl,ls1088a-pcie-ep","fsl,ls-pcie-ep";
> > + reg = <0x00 0x03600000 0x0 0x00100000
> > + 0x30 0x00000000 0x8 0x00000000>;
> > + reg-names = "regs", "addr_space";
> > + num-ib-windows = <6>;
> > + num-ob-windows = <8>;
> > + status = "disabled";
> > + };
> > +
> > smmu: iommu@5000000 {
> > compatible = "arm,mmu-500";
> > reg = <0 0x5000000 0 0x800000>;
> > --
> > 2.9.5
> >
