On Tue, Aug 20, 2019 at 06:47:27PM +0300, Kalle Valo wrote:
Missing commit message and Sob (and on the other patches).
> ---
> .../bindings/net/wireless/qcom,ath11k.txt | 127 +++++++++++++++++++++
> 1 file changed, 127 insertions(+)
Please use the DT schema format (YAML). See writing-schema.md.
>
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
> new file mode 100644
> index 000000000000..1824238b4b50
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.txt
> @@ -0,0 +1,127 @@
> +* Qualcomm Technologies ath11k wireless devices
> +
> +Required properties:
> +- compatible: Should be "qcom,ipq8074-wifi"
> +
> +AHB based ipq8074 uses most of the properties defined in this doc.
> +
> +Optional properties:
> +- reg: Address and length of the register set for the device.
> +- interrupts: List of interrupt lines. Must contain an entry
> + for each entry in the interrupt-names property.
Need to be explicit as to how many interrupts and what they are.
> +- interrupt-names: Must include the entries for CE interrupt
> + names ("ce0" to "ce11") and hw srng interrupt
> + names.
> +- qcom,rproc: DT entry of q6v5-wcss
> +
> +Example:
> +
> +wifi0: wifi@c000000 {
> + compatible = "qcom,ipq8074-wifi";
> + reg = <0xc000000 0x2000000>;
> + interrupts = <0 320 1>,
> + <0 319 1>,
> + <0 318 1>,
> + <0 317 1>,
> + <0 316 1>,
> + <0 315 1>,
> + <0 314 1>,
> + <0 311 1>,
> + <0 310 1>,
> + <0 411 1>,
> + <0 410 1>,
> + <0 40 1>,
> + <0 39 1>,
> + <0 302 1>,
> + <0 301 1>,
> + <0 37 1>,
> + <0 36 1>,
> + <0 296 1>,
> + <0 295 1>,
> + <0 294 1>,
> + <0 293 1>,
> + <0 292 1>,
> + <0 291 1>,
> + <0 290 1>,
> + <0 289 1>,
> + <0 288 1>,
> + <0 239 1>,
> + <0 236 1>,
> + <0 235 1>,
> + <0 234 1>,
> + <0 233 1>,
> + <0 232 1>,
> + <0 231 1>,
> + <0 230 1>,
> + <0 229 1>,
> + <0 228 1>,
> + <0 224 1>,
> + <0 223 1>,
> + <0 203 1>,
> + <0 183 1>,
> + <0 180 1>,
> + <0 179 1>,
> + <0 178 1>,
> + <0 177 1>,
> + <0 176 1>,
> + <0 163 1>,
> + <0 162 1>,
> + <0 160 1>,
> + <0 159 1>,
> + <0 158 1>,
> + <0 157 1>,
> + <0 156 1>;
> + interrupt-names = "misc-pulse1",
> + "misc-latch",
> + "sw-exception",
> + "watchdog",
> + "ce0",
> + "ce1",
> + "ce2",
> + "ce3",
> + "ce4",
> + "ce5",
> + "ce6",
> + "ce7",
> + "ce8",
> + "ce9",
> + "ce10",
> + "ce11",
> + "host2wbm-desc-feed",
> + "host2reo-re-injection",
> + "host2reo-command",
> + "host2rxdma-monitor-ring3",
> + "host2rxdma-monitor-ring2",
> + "host2rxdma-monitor-ring1",
> + "reo2ost-exception",
> + "wbm2host-rx-release",
> + "reo2host-status",
> + "reo2host-destination-ring4",
> + "reo2host-destination-ring3",
> + "reo2host-destination-ring2",
> + "reo2host-destination-ring1",
> + "rxdma2host-monitor-destination-mac3",
> + "rxdma2host-monitor-destination-mac2",
> + "rxdma2host-monitor-destination-mac1",
> + "ppdu-end-interrupts-mac3",
> + "ppdu-end-interrupts-mac2",
> + "ppdu-end-interrupts-mac1",
> + "rxdma2host-monitor-status-ring-mac3",
> + "rxdma2host-monitor-status-ring-mac2",
> + "rxdma2host-monitor-status-ring-mac1",
> + "host2rxdma-host-buf-ring-mac3",
> + "host2rxdma-host-buf-ring-mac2",
> + "host2rxdma-host-buf-ring-mac1",
> + "rxdma2host-destination-ring-mac3",
> + "rxdma2host-destination-ring-mac2",
> + "rxdma2host-destination-ring-mac1",
> + "host2tcl-input-ring4",
> + "host2tcl-input-ring3",
> + "host2tcl-input-ring2",
> + "host2tcl-input-ring1",
> + "wbm2host-tx-completions-ring3",
> + "wbm2host-tx-completions-ring2",
> + "wbm2host-tx-completions-ring1",
> + "tcl2host-status-ring";
> + qcom,rproc = <&qcom_q6v5_wcss>;
> +};
>
