[PATCH v1 2/2] dt-bindings: rtc: Add optional status property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some products may not support MC146818 RTC CMOS device. Introduce a optional
'status' standard property for RTC-CMOS to indicate if the MC146818 RTC device
is available (status="okay") or not (status="disabled")

Signed-off-by: Rahul Tanwar <rahul.tanwar@xxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/rtc/rtc-cmos.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
index b94b35f3600b..fea4fe0ed4b9 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt
@@ -11,6 +11,9 @@ Optional properties:
     called "Register B".
   - freq-reg : Contains the initial value of the frequency register also
     called "Regsiter A".
+  - status: indicates the operational status of the device.
+    Value must be either "disabled" or "okay".
+
 
 "Register A" and "B" are usually initialized by the firmware (BIOS for
 instance). If this is not done, it can be performed by the driver.
@@ -24,4 +27,5 @@ ISA Example:
 	         ctrl-reg = <2>;
 	         freq-reg = <0x26>;
 	         reg = <1 0x70 2>;
+		 status = "okay";
 	 };
-- 
2.11.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux