Move some register definitions to the per-device array of struct
st_lsm6dsx_sensor_settings in order to simplify adding new sensor
devices to the driver.
Also, remove completely unused register definitions.
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
Acked-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 6 ++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 31 ++++++++++++++------
2 files changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 055e52dec36a..090b7bd3c5b0 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -203,6 +203,9 @@ struct st_lsm6dsx_ext_dev_settings {
/**
* struct st_lsm6dsx_settings - ST IMU sensor settings
* @wai: Sensor WhoAmI default value.
+ * @int1_addr: Control Register address for INT1
+ * @int2_addr: Control Register address for INT2
+ * @reset_addr: register address for reset/reboot
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
* @channels: IIO channels supported by the device.
@@ -216,6 +219,9 @@ struct st_lsm6dsx_ext_dev_settings {
*/
struct st_lsm6dsx_settings {
u8 wai;
+ u8 int1_addr;
+ u8 int2_addr;
+ u8 reset_addr;
u16 max_fifo_size;
struct {
enum st_lsm6dsx_hw_id hw_id;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 0aa93b45d772..1b46d9dc2089 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -49,17 +49,12 @@
#include "st_lsm6dsx.h"
-#define ST_LSM6DSX_REG_INT1_ADDR 0x0d
-#define ST_LSM6DSX_REG_INT2_ADDR 0x0e
#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3)
#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f
-#define ST_LSM6DSX_REG_RESET_ADDR 0x12
#define ST_LSM6DSX_REG_RESET_MASK BIT(0)
#define ST_LSM6DSX_REG_BOOT_MASK BIT(7)
#define ST_LSM6DSX_REG_BDU_ADDR 0x12
#define ST_LSM6DSX_REG_BDU_MASK BIT(6)
-#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13
-#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5)
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
@@ -78,6 +73,9 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x69,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 1365,
.id = {
{
@@ -187,6 +185,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x69,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 682,
.id = {
{
@@ -296,6 +297,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6a,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 682,
.id = {
{
@@ -414,6 +418,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6c,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
{
@@ -544,6 +551,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
{
@@ -645,6 +655,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
{
.wai = 0x6b,
+ .int1_addr = 0x0d,
+ .int2_addr = 0x0e,
+ .reset_addr = 0x12,
.max_fifo_size = 512,
.id = {
{
@@ -1172,10 +1185,10 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
switch (drdy_pin) {
case 1:
- *drdy_reg = ST_LSM6DSX_REG_INT1_ADDR;
+ *drdy_reg = hw->settings->int1_addr;
break;
case 2:
- *drdy_reg = ST_LSM6DSX_REG_INT2_ADDR;
+ *drdy_reg = hw->settings->int2_addr;
break;
default:
dev_err(hw->dev, "unsupported data ready pin\n");
@@ -1275,7 +1288,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
int err;
/* device sw reset */
- err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+ err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
ST_LSM6DSX_REG_RESET_MASK,
FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1));
if (err < 0)
@@ -1284,7 +1297,7 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
msleep(50);
/* reload trimming parameter */
- err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+ err = regmap_update_bits(hw->regmap, hw->settings->reset_addr,
ST_LSM6DSX_REG_BOOT_MASK,
FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1));
if (err < 0)
--
2.20.1
