Hello Pavel, 17.08.19 18:02, Pavel Machek пише: > Hi! > >>>>>> All pattern is predefined, you can't change them at all. >>>>>> I just tried to describe real things what happened in LED board. >>>>>> It's ticks every 800 milliseconds for Pipe LEDs. >>>>> >>>>> It makes me wonder how you figured out the values? If you have >>>>> a documentation for this controller, could you share how the pattern >>>>> settings are documented? >>>> >>>> I saw the code of firmware. >>>> Not sure if I can find any documentation for it right now. >>> >>> Have you tried to alter the values? Or check what happens when >>> the duplication is removed? >> >> What do you mean alter? It doesn't make any sense. >> Board is accepts only brightness level from '0' to '5'. >> I'm really confused :-) > > For the record, what you did seems ok to me. Thanks :) >>>> Ok, I will reduce it. >>> >>> Please hold on for a while. I will have some more remarks to the driver, >>> just collecting missing info for now to gain more complete view on this >>> device. >> >> Here is the full story: >> >> EL15203000 LEDs board (aka RED LEDs board, because it has only RED LEDs). >> It's provide access to 3 LEDs: >> >> - First LED (Screen) is a light tube around big 21" screen >> It's have 3 brightness levels: >> * OFF >> * ON >> * Breathing mode (8 seconds full cycle) >> - Second LED (Vending area) is highlight coffee cap >> * OFF >> * ON > > Again, this is ok. > >> - Third LED (Pipe) is actually virtual, because consists from 5 LEDs >> * OFF for all 5 LEDs >> * ON for all 5 LEDs >> * Cascade >> * Inverses cascade >> * Bounce >> * Inverses bounce > > But having one virtual LED that is really five LEDs scares me a tiny > bit. But I guess its ok for your case... > > Best regards, > Pavel > > > > -- Best regards, Oleh Kravchenko
Attachment:
signature.asc
Description: OpenPGP digital signature
