From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> Date: Fri, 16 Aug 2019 16:09:58 +0300 > This changeset adds support for Analog Devices Industrial Ethernet PHYs. > Particularly the PHYs this driver adds support for: > * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY > * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit > Ethernet PHY > > The 2 chips are register compatible with one another. The main > difference being that ADIN1200 doesn't operate in gigabit mode. > > The chips can be operated by the Generic PHY driver as well via the > standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the > kernel as well. This assumes that configuration of the PHY has been done > completely in HW, according to spec, i.e. no extra SW configuration > required. > > This changeset also implements the ability to configure the chips via SW > registers. > > Datasheets: > https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf > https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdf > > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> Series applied, thank you.
