Dne sreda, 14. avgust 2019 ob 15:28:53 CEST je Clément Péron napisal(a): > Hi, > > On Wed, 14 Aug 2019 at 15:20, Corentin Labbe <clabbe.montjoie@xxxxxxxxx> wrote: > > On Mon, Aug 12, 2019 at 12:56:56PM +0200, Jernej Škrabec wrote: > > > Dne četrtek, 08. avgust 2019 ob 10:42:53 CEST je Corentin Labbe napisal(a): > > > > This patch adds the evaluation variant of the model A of the PineH64. > > > > The model A has the same size of the pine64 and has a PCIE slot. > > > > > > > > The only devicetree difference with current pineH64, is the PHY > > > > regulator. > > > > > > I have Model A board which also needs ddc-en-gpios property for HDMI > > > connector in order for HDMI to work correctly. Otherwise it will just > > > use 1024x768 resolution. Can you confirm that? > > Schematics Rev A: > http://files.pine64.org/doc/Pine%20H64/Pine%20H64%20Ver1.1-20180104.pdf > > Rev B: > http://files.pine64.org/doc/Pine%20H64/PINE-H6-model-B-20181212-schematic.pd > f > > There is a DDC_EN on REV A not on REV B > > Regards, > Clément > > > > Best regards, > > > Jernej > > > > Sorry I didnt use at all video stuff (like HDMI), so I cannot answer now. > > > > Could you send me a patch against my future v2 and I could test > > with/without. I don't have access to my Model A board currently, but this should suffice: &connector { ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ }; Best regards, Jernej > > > > Regards > > > > -- > > You received this message because you are subscribed to the Google Groups > > "linux-sunxi" group. To unsubscribe from this group and stop receiving > > emails from it, send an email to > > linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the > > web, visit > > https://groups.google.com/d/msgid/linux-sunxi/20190814132001.GC24324%40Re > > d.
