This patch adds the evaluation variant of the model A of the PineH64. The model A has the same size of the pine64 and has a PCIE slot. The only devicetree difference with current pineH64, is the PHY regulator. Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../sun50i-h6-pine-h64-modelA-eval.dts | 26 +++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index f6db0611cb85..9a02166cbf72 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts new file mode 100644 index 000000000000..d8ff02747efe --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 Corentin Labbe <clabbe.montjoie@xxxxxxxxx> + */ + +#include "sun50i-h6-pine-h64.dts" + +/ { + model = "Pine H64 model A evaluation board"; + compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6"; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + +}; + +&emac { + phy-supply = <®_gmac_3v3>; +}; -- 2.21.0