Re: [PATCH v8 04/14] media: rkisp1: add Rockchip MIPI Synopsys DPHY driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Am Donnerstag, 15. August 2019, 19:54:40 CEST schrieb Laurent Pinchart:
> On Wed, Aug 07, 2019 at 10:37:55AM -0300, Helen Koike wrote:
> > On 8/7/19 10:05 AM, Sakari Ailus wrote:
> > > On Tue, Jul 30, 2019 at 03:42:46PM -0300, Helen Koike wrote:
> > >> From: Jacob Chen <jacob2.chen@xxxxxxxxxxxxxx>
> > >>
> > >> This commit adds a subdev driver for Rockchip MIPI Synopsys DPHY driver
> > >>
> > >> Signed-off-by: Jacob Chen <jacob2.chen@xxxxxxxxxxxxxx>
> > >> Signed-off-by: Shunqian Zheng <zhengsq@xxxxxxxxxxxxxx>
> > >> Signed-off-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
> > >> [migrate to phy framework]
> > >> Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> > >> [update for upstream]
> > >> Signed-off-by: Helen Koike <helen.koike@xxxxxxxxxxxxx>
> > >>
> > >> ---
> > >>
> > >> Changes in v8:
> > >> - Remove boiler plate license text
> > >>
> > >> Changes in v7:
> > >> - Migrate dphy specific code from
> > >> drivers/media/platform/rockchip/isp1/mipi_dphy_sy.c
> > >> to drivers/phy/rockchip/phy-rockchip-dphy.c
> > >> - Drop support for rk3288
> > >> - Drop support for dphy txrx
> > >> - code styling and checkpatch fixes
> > >>
> > >>  drivers/phy/rockchip/Kconfig             |   8 +
> > >>  drivers/phy/rockchip/Makefile            |   1 +
> > >>  drivers/phy/rockchip/phy-rockchip-dphy.c | 408 +++++++++++++++++++++++
> > >>  3 files changed, 417 insertions(+)
> > >>  create mode 100644 drivers/phy/rockchip/phy-rockchip-dphy.c
> > >>
> > >> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> > >> index c454c90cd99e..afd072f135e6 100644
> > >> --- a/drivers/phy/rockchip/Kconfig
> > >> +++ b/drivers/phy/rockchip/Kconfig
> > >> @@ -9,6 +9,14 @@ config PHY_ROCKCHIP_DP
> > >>  	help
> > >>  	  Enable this to support the Rockchip Display Port PHY.
> > >>  
> > >> +config PHY_ROCKCHIP_DPHY
> > >> +	tristate "Rockchip MIPI Synopsys DPHY driver"
> 
> How much of this PHY is Rockchip-specific ? Would it make sense to turn
> it into a Synopsys DPHY driver, with some Rockchip glue ? I suppose this
> could always be done later, if needed (and I also suppose there's no
> existing driver in drivers/phy/ that support the same Synopsys IP).

I'm not so versed in the video-stuff itself but I should be able to shed
some light on where the this thingy sits on the soc :-) .

SoCs like the rk3399 have 3 mipi-dphy instances:
- TX0 - output-only for dsi0
  with its access living _inside_ the mipi-dsi0 controller
  the registers to control it are part of the dsi-registers]

- TX1RX1 - output for dsi1 / input for isp1 (shared between them)
  its access lives inside the dsi1 controller's registers as well
  [not part of Helen's initial series, but I do have a wip-patch
   that exposes a phy-device from the dsi-driver for a later addon]

- RX1 - input for isp0 - this driver
  it's access is exposed through the GRF (General Register Files) of the soc
  The GRF is "chip designer's playground", registers change between each
  soc ... and the "randomness" can be seen by the RK3399_GRF_SOC_CONx
  register-naming, which is what they're called in all docs as well.

So I do think this is highly Rockchip-specific and it doesn't really make
a lot of sense trying to squeeze commonality out of it _before_ a second
actual instance of this rather strange system appears from some other
vendor :-) ... and even then I'd think keeping them separate would 
actually make things a lot easier long term.


Heiko


> 
> > >> +	depends on ARCH_ROCKCHIP && OF
> > > 
> > > How about (...) || COMPILE_TEST ?
> > > 
> > >> +	select GENERIC_PHY_MIPI_DPHY
> > >> +	select GENERIC_PHY
> > >> +	help
> > >> +	  Enable this to support the Rockchip MIPI Synopsys DPHY.
> > >> +
> > >>  config PHY_ROCKCHIP_EMMC
> > >>  	tristate "Rockchip EMMC PHY Driver"
> > >>  	depends on ARCH_ROCKCHIP && OF
> > >> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> > >> index fd21cbaf40dd..f62e9010bcaf 100644
> > >> --- a/drivers/phy/rockchip/Makefile
> > >> +++ b/drivers/phy/rockchip/Makefile
> > >> @@ -1,5 +1,6 @@
> > >>  # SPDX-License-Identifier: GPL-2.0
> > >>  obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
> > >> +obj-$(CONFIG_PHY_ROCKCHIP_DPHY)		+= phy-rockchip-dphy.o
> > >>  obj-$(CONFIG_PHY_ROCKCHIP_EMMC)		+= phy-rockchip-emmc.o
> > >>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
> > >>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
> > >> diff --git a/drivers/phy/rockchip/phy-rockchip-dphy.c b/drivers/phy/rockchip/phy-rockchip-dphy.c
> > >> new file mode 100644
> > >> index 000000000000..3a29976c2dff
> > >> --- /dev/null
> > >> +++ b/drivers/phy/rockchip/phy-rockchip-dphy.c
> > >> @@ -0,0 +1,408 @@
> > >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > >> +/*
> > >> + * Rockchip MIPI Synopsys DPHY driver
> > >> + *
> > >> + * Based on:
> > >> + *
> > >> + * Copyright (C) 2016 FuZhou Rockchip Co., Ltd.
> > >> + * Author: Yakir Yang <ykk@@rock-chips.com>
> > >> + */
> > >> +
> > >> +#include <linux/clk.h>
> > >> +#include <linux/io.h>
> > >> +#include <linux/mfd/syscon.h>
> > >> +#include <linux/module.h>
> > >> +#include <linux/of.h>
> > >> +#include <linux/of_device.h>
> > >> +#include <linux/phy/phy.h>
> > >> +#include <linux/phy/phy-mipi-dphy.h>
> > >> +#include <linux/platform_device.h>
> > >> +#include <linux/regmap.h>
> > >> +
> > >> +#define RK3399_GRF_SOC_CON9	0x6224
> > >> +#define RK3399_GRF_SOC_CON21	0x6254
> > >> +#define RK3399_GRF_SOC_CON22	0x6258
> > >> +#define RK3399_GRF_SOC_CON23	0x625c
> > >> +#define RK3399_GRF_SOC_CON24	0x6260
> > >> +#define RK3399_GRF_SOC_CON25	0x6264
> > >> +#define RK3399_GRF_SOC_STATUS1	0xe2a4
> > >> +
> > >> +#define CLOCK_LANE_HS_RX_CONTROL		0x34
> > >> +#define LANE0_HS_RX_CONTROL			0x44
> > >> +#define LANE1_HS_RX_CONTROL			0x54
> > >> +#define LANE2_HS_RX_CONTROL			0x84
> > >> +#define LANE3_HS_RX_CONTROL			0x94
> > >> +#define HS_RX_DATA_LANES_THS_SETTLE_CONTROL	0x75
> > >> +
> > >> +#define MAX_DPHY_CLK 8
> > >> +
> > >> +#define PHY_TESTEN_ADDR			(0x1 << 16)
> > >> +#define PHY_TESTEN_DATA			(0x0 << 16)
> > >> +#define PHY_TESTCLK			(0x1 << 1)
> > >> +#define PHY_TESTCLR			(0x1 << 0)
> 
> Maybe s/0x// for the previous four lines ?
> 
> > >> +#define THS_SETTLE_COUNTER_THRESHOLD	0x04
> > >> +
> > >> +#define HIWORD_UPDATE(val, mask, shift) \
> > >> +	((val) << (shift) | (mask) << ((shift) + 16))
> 
> As you use this in a single place, I would inline it, possibly with a
> small comment that explains what's happening.
> 
> > >> +
> > >> +#define GRF_SOC_CON12                           0x0274
> > >> +
> > >> +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
> > >> +#define GRF_EDP_REF_CLK_SEL_INTER               BIT(4)
> > >> +
> > >> +#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK           BIT(21)
> > >> +#define GRF_EDP_PHY_SIDDQ_ON                    0
> > >> +#define GRF_EDP_PHY_SIDDQ_OFF                   BIT(5)
> 
> I would recommend aligning the value of of all macros in the same way.
> 
> > >> +
> > >> +struct hsfreq_range {
> > >> +	u32 range_h;
> 
> The structure would be more compact if you turned this into a u16.
> 
> > >> +	u8 cfg_bit;
> > >> +};
> > >> +
> > >> +static const struct hsfreq_range rk3399_mipidphy_hsfreq_ranges[] = {
> > >> +	{  89, 0x00}, {  99, 0x10}, { 109, 0x20}, { 129, 0x01},
> > >> +	{ 139, 0x11}, { 149, 0x21}, { 169, 0x02}, { 179, 0x12},
> > >> +	{ 199, 0x22}, { 219, 0x03}, { 239, 0x13}, { 249, 0x23},
> > >> +	{ 269, 0x04}, { 299, 0x14}, { 329, 0x05}, { 359, 0x15},
> > >> +	{ 399, 0x25}, { 449, 0x06}, { 499, 0x16}, { 549, 0x07},
> > >> +	{ 599, 0x17}, { 649, 0x08}, { 699, 0x18}, { 749, 0x09},
> > >> +	{ 799, 0x19}, { 849, 0x29}, { 899, 0x39}, { 949, 0x0a},
> > >> +	{ 999, 0x1a}, {1049, 0x2a}, {1099, 0x3a}, {1149, 0x0b},
> > >> +	{1199, 0x1b}, {1249, 0x2b}, {1299, 0x3b}, {1349, 0x0c},
> > >> +	{1399, 0x1c}, {1449, 0x2c}, {1500, 0x3c}
> 
> Maybe s/{/{ / and s/}/ }/ to give it a bit more air ? :-)
> 
> > >> +};
> > >> +
> > >> +static const char * const rk3399_mipidphy_clks[] = {
> > >> +	"dphy-ref",
> > >> +	"dphy-cfg",
> > >> +	"grf",
> > >> +};
> > >> +
> > >> +enum dphy_reg_id {
> > >> +	GRF_DPHY_RX0_TURNDISABLE = 0,
> > >> +	GRF_DPHY_RX0_FORCERXMODE,
> > >> +	GRF_DPHY_RX0_FORCETXSTOPMODE,
> > >> +	GRF_DPHY_RX0_ENABLE,
> > >> +	GRF_DPHY_RX0_TESTCLR,
> > >> +	GRF_DPHY_RX0_TESTCLK,
> > >> +	GRF_DPHY_RX0_TESTEN,
> > >> +	GRF_DPHY_RX0_TESTDIN,
> > >> +	GRF_DPHY_RX0_TURNREQUEST,
> > >> +	GRF_DPHY_RX0_TESTDOUT,
> > >> +	GRF_DPHY_TX0_TURNDISABLE,
> > >> +	GRF_DPHY_TX0_FORCERXMODE,
> > >> +	GRF_DPHY_TX0_FORCETXSTOPMODE,
> > >> +	GRF_DPHY_TX0_TURNREQUEST,
> > >> +	GRF_DPHY_TX1RX1_TURNDISABLE,
> > >> +	GRF_DPHY_TX1RX1_FORCERXMODE,
> > >> +	GRF_DPHY_TX1RX1_FORCETXSTOPMODE,
> > >> +	GRF_DPHY_TX1RX1_ENABLE,
> > >> +	GRF_DPHY_TX1RX1_MASTERSLAVEZ,
> > >> +	GRF_DPHY_TX1RX1_BASEDIR,
> > >> +	GRF_DPHY_TX1RX1_ENABLECLK,
> > >> +	GRF_DPHY_TX1RX1_TURNREQUEST,
> > >> +	GRF_DPHY_RX1_SRC_SEL,
> > >> +	/* rk3288 only */
> > >> +	GRF_CON_DISABLE_ISP,
> > >> +	GRF_CON_ISP_DPHY_SEL,
> > >> +	GRF_DSI_CSI_TESTBUS_SEL,
> > >> +	GRF_DVP_V18SEL,
> > >> +	/* below is for rk3399 only */
> > >> +	GRF_DPHY_RX0_CLK_INV_SEL,
> > >> +	GRF_DPHY_RX1_CLK_INV_SEL,
> > >> +};
> > >> +
> > >> +struct dphy_reg {
> > >> +	u32 offset;
> > >> +	u32 mask;
> > >> +	u32 shift;
> 
> The offset should hold in 16 bits and the mask and shift in 8 bits. That
> would save space in the table below.
> 
> > >> +};
> > >> +
> > >> +#define PHY_REG(_offset, _width, _shift) \
> > >> +	{ .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
> > >> +
> > >> +static const struct dphy_reg rk3399_grf_dphy_regs[] = {
> > >> +	[GRF_DPHY_RX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON9, 4, 0),
> > >> +	[GRF_DPHY_RX0_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 10),
> > >> +	[GRF_DPHY_RX1_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 11),
> > >> +	[GRF_DPHY_RX0_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 0),
> > >> +	[GRF_DPHY_RX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 4),
> > >> +	[GRF_DPHY_RX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 8),
> > >> +	[GRF_DPHY_RX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 12),
> > >> +	[GRF_DPHY_TX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 0),
> > >> +	[GRF_DPHY_TX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 4),
> > >> +	[GRF_DPHY_TX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 8),
> > >> +	[GRF_DPHY_TX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 12),
> > >> +	[GRF_DPHY_TX1RX1_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 0),
> > >> +	[GRF_DPHY_TX1RX1_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 4),
> > >> +	[GRF_DPHY_TX1RX1_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 8),
> > >> +	[GRF_DPHY_TX1RX1_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 12),
> > >> +	[GRF_DPHY_TX1RX1_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON24, 4, 0),
> > >> +	[GRF_DPHY_RX1_SRC_SEL] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 4),
> > >> +	[GRF_DPHY_TX1RX1_BASEDIR] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 5),
> > >> +	[GRF_DPHY_TX1RX1_ENABLECLK] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 6),
> > >> +	[GRF_DPHY_TX1RX1_MASTERSLAVEZ] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 7),
> > >> +	[GRF_DPHY_RX0_TESTDIN] = PHY_REG(RK3399_GRF_SOC_CON25, 8, 0),
> > >> +	[GRF_DPHY_RX0_TESTEN] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 8),
> > >> +	[GRF_DPHY_RX0_TESTCLK] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 9),
> > >> +	[GRF_DPHY_RX0_TESTCLR] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 10),
> > >> +	[GRF_DPHY_RX0_TESTDOUT] = PHY_REG(RK3399_GRF_SOC_STATUS1, 8, 0),
> 
> The annoying part with such an indirection is that you can't really
> write multiple fields in a single register with a single operation. Is
> the register mapping completely different between the rk3288 and the
> rk3399, or are the fields grouped in registers in a similar way ? In the
> latter case we could possibly optimise it.
> 
> > >> +};
> > >> +
> > >> +struct dphy_drv_data {
> > >> +	const char * const *clks;
> > >> +	int num_clks;
> 
> This is never negative, you can make it an unsigned int.
> 
> > >> +	const struct hsfreq_range *hsfreq_ranges;
> > >> +	int num_hsfreq_ranges;
> 
> Same here.
> 
> > >> +	const struct dphy_reg *regs;
> > >> +};
> > >> +
> > >> +struct rockchip_dphy {
> > >> +	struct device *dev;
> > >> +	struct regmap *grf;
> > >> +	const struct dphy_reg *grf_regs;
> > >> +	struct clk_bulk_data clks[MAX_DPHY_CLK];
> > >> +
> > >> +	const struct dphy_drv_data *drv_data;
> > >> +	struct phy_configure_opts_mipi_dphy config;
> > >> +};
> > >> +
> > >> +static inline void write_grf_reg(struct rockchip_dphy *priv,
> > >> +				 int index, u8 value)
> 
> Maybe unsigned int index ?
> 
> > >> +{
> > >> +	const struct dphy_reg *reg = &priv->grf_regs[index];
> > >> +	unsigned int val = HIWORD_UPDATE(value, reg->mask, reg->shift);
> > >> +
> > >> +	WARN_ON(!reg->offset);
> > >> +	regmap_write(priv->grf, reg->offset, val);
> > >> +}
> > >> +
> > >> +static void mipidphy0_wr_reg(struct rockchip_dphy *priv,
> > >> +			     u8 test_code, u8 test_data)
> 
> Function (and structure) names have different prefixes, would it make
> sense to standardise them ? Maybe rockchip_dphy_ ? Or rk_dphy_ for a
> shorter version ? This could become rk_dphy_write_dphy(), and the
> previous function rk_dphy_write_grf().
> 
> > >> +{
> > >> +	/*
> > >> +	 * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
> > >> +	 * is latched internally as the current test code. Test data is
> > >> +	 * programmed internally by rising edge on TESTCLK.
> > >> +	 */
> 
> I've never understood why PHYs tend to have a register named TEST that
> contains way more than test data :-)
> 
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 1);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTDIN, test_code);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTEN, 1);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 0);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTEN, 0);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTDIN, test_data);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 1);
> > >> +}
> > >> +
> > >> +/* should be move to power_on */
> 
> s/move/moved/
> 
> Do you mean merging the two functions together ? What prevents from
> doing so ? 
> 
> > >> +static int mipidphy_rx_stream_on(struct rockchip_dphy *priv)
> > >> +{
> > >> +	const struct dphy_drv_data *drv_data = priv->drv_data;
> > >> +	const struct hsfreq_range *hsfreq_ranges = drv_data->hsfreq_ranges;
> > >> +	struct phy_configure_opts_mipi_dphy *config = &priv->config;
> > >> +	unsigned int i, hsfreq = 0, data_rate_mbps = config->hs_clk_rate;
> > >> +	int num_hsfreq_ranges = drv_data->num_hsfreq_ranges;
> > >> +
> > >> +	do_div(data_rate_mbps, 1000 * 1000);
> > >> +
> > >> +	dev_dbg(priv->dev, "%s: lanes %d - data_rate_mbps %u\n",
> > >> +		__func__, config->lanes, data_rate_mbps);
> > >> +
> > >> +	for (i = 0; i < num_hsfreq_ranges; i++) {
> > >> +		if (hsfreq_ranges[i].range_h >= data_rate_mbps) {
> > >> +			hsfreq = hsfreq_ranges[i].cfg_bit;
> > >> +			break;
> > >> +		}
> > >> +	}
> 
> As num_hsfreq_ranges and hsfreq_ranges are only used in this loop, I
> would remove the local variables.
> 
> > >> +
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_FORCERXMODE, 0);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_FORCETXSTOPMODE, 0);
> > >> +
> > >> +	/* Disable lan turn around, which is ignored in receive mode */
> 
> Is it "lan turn around", or "lane turn around" ?
> 
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TURNREQUEST, 0);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TURNDISABLE, 0xf);
> > >> +
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_ENABLE, GENMASK(config->lanes - 1, 0));
> > >> +
> > >> +	/* dphy start */
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 1);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTCLR, 1);
> > >> +	usleep_range(100, 150);
> > >> +	write_grf_reg(priv, GRF_DPHY_RX0_TESTCLR, 0);
> > >> +	usleep_range(100, 150);
> > >> +
> > >> +	/* set clock lane */
> > >> +	/* HS hsfreq_range & lane 0  settle bypass */
> > >> +	mipidphy0_wr_reg(priv, CLOCK_LANE_HS_RX_CONTROL, 0);
> > >> +	/* HS RX Control of lane0 */
> > >> +	mipidphy0_wr_reg(priv, LANE0_HS_RX_CONTROL, hsfreq << 1);
> > >> +	/* HS RX Control of lane1 */
> > >> +	mipidphy0_wr_reg(priv, LANE1_HS_RX_CONTROL, 0);
> > >> +	/* HS RX Control of lane2 */
> > >> +	mipidphy0_wr_reg(priv, LANE2_HS_RX_CONTROL, 0);
> > >> +	/* HS RX Control of lane3 */
> > >> +	mipidphy0_wr_reg(priv, LANE3_HS_RX_CONTROL, 0);
> 
> Does this hardcode usage of a single lane ?
> 
> > >> +	/* HS RX Data Lanes Settle State Time Control */
> > >> +	mipidphy0_wr_reg(priv, HS_RX_DATA_LANES_THS_SETTLE_CONTROL,
> > >> +			 THS_SETTLE_COUNTER_THRESHOLD);
> > >> +
> > >> +	/* Normal operation */
> > >> +	mipidphy0_wr_reg(priv, 0x0, 0);
> > >> +
> > >> +	return 0;
> > >> +}
> > >> +
> > >> +static int rockchip_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
> > >> +{
> > >> +	struct rockchip_dphy *priv = phy_get_drvdata(phy);
> > >> +	int ret;
> > >> +
> > >> +	/* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
> 
> I'm not sure to understand what this means.
> 
> > >> +	ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
> > >> +	if (ret)
> > >> +		return ret;
> > >> +
> > >> +	memcpy(&priv->config, opts, sizeof(priv->config));
> > > 
> > > You could to:
> > > 
> > > 	priv->config = *opts;
> > > 
> > > Up to you. Some people like memcpy(). :-)
> > 
> > your way is better thanks!
> > 
> > >> +
> > >> +	return 0;
> > >> +}
> > >> +
> > >> +static int rockchip_dphy_power_on(struct phy *phy)
> > >> +{
> > >> +	struct rockchip_dphy *priv = phy_get_drvdata(phy);
> > >> +	int ret;
> > >> +
> > >> +	ret = clk_bulk_enable(priv->drv_data->num_clks, priv->clks);
> > >> +	if (ret)
> > >> +		return ret;
> > >> +
> > >> +	return mipidphy_rx_stream_on(priv);
> 
> Should you call clk_bulk_disable() if mipidphy_rx_stream_on() fails ?
> Actually that function never fails, so I'd make it a void function, and
> return 0 here.
> 
> What happens if the clock rate is higher than the maximum supported by
> the PHY ? Shouldn't rockchip_dphy_configure() fail in that case ?
> 
> > >> +}
> > >> +
> > >> +static int rockchip_dphy_power_off(struct phy *phy)
> > >> +{
> > >> +	struct rockchip_dphy *priv = phy_get_drvdata(phy);
> > >> +
> 
> No need to write any register ? That's scary, what will happen on the
> next power on, when the clocks gets enabled ?
> 
> > >> +	clk_bulk_disable(priv->drv_data->num_clks, priv->clks);
> > >> +	return 0;
> > >> +}
> > >> +
> > >> +static int rockchip_dphy_init(struct phy *phy)
> > >> +{
> > >> +	struct rockchip_dphy *priv = phy_get_drvdata(phy);
> > >> +	int ret;
> > >> +
> > >> +	ret = clk_bulk_prepare(priv->drv_data->num_clks, priv->clks);
> > > 
> > > return ...;
> > > 
> > >> +	if (ret)
> > >> +		return ret;
> > >> +	return 0;
> > >> +}
> > >> +
> > >> +static int rockchip_dphy_exit(struct phy *phy)
> > >> +{
> > >> +	struct rockchip_dphy *priv = phy_get_drvdata(phy);
> > >> +
> > >> +	clk_bulk_unprepare(priv->drv_data->num_clks, priv->clks);
> > >> +	return 0;
> > >> +}
> > >> +
> > >> +static const struct phy_ops rockchip_dphy_ops = {
> > >> +	.power_on	= rockchip_dphy_power_on,
> > >> +	.power_off	= rockchip_dphy_power_off,
> > >> +	.init		= rockchip_dphy_init,
> > >> +	.exit		= rockchip_dphy_exit,
> > >> +	.configure	= rockchip_dphy_configure,
> > >> +	.owner		= THIS_MODULE,
> > >> +};
> > >> +
> > >> +static const struct dphy_drv_data rk3399_mipidphy_drv_data = {
> > >> +	.clks = rk3399_mipidphy_clks,
> > >> +	.num_clks = ARRAY_SIZE(rk3399_mipidphy_clks),
> > >> +	.hsfreq_ranges = rk3399_mipidphy_hsfreq_ranges,
> > >> +	.num_hsfreq_ranges = ARRAY_SIZE(rk3399_mipidphy_hsfreq_ranges),
> > >> +	.regs = rk3399_grf_dphy_regs,
> > > 
> > > Do you expect to support more of the similar PHY(s) --- are there such? If
> > > not, you could put these in the code that uses them.
> > 
> > Yes, for rk3288 in the future.
> > 
> > >> +};
> > >> +
> > >> +static const struct of_device_id rockchip_dphy_dt_ids[] = {
> > >> +	{
> > >> +		.compatible = "rockchip,rk3399-mipi-dphy",
> > >> +		.data = &rk3399_mipidphy_drv_data,
> > >> +	},
> > >> +	{}
> > >> +};
> > >> +MODULE_DEVICE_TABLE(of, rockchip_dphy_dt_ids);
> > >> +
> > >> +static int rockchip_dphy_probe(struct platform_device *pdev)
> > >> +{
> > >> +	struct device *dev = &pdev->dev;
> > >> +	struct device_node *np = dev->of_node;
> > >> +	const struct dphy_drv_data *drv_data;
> > >> +	struct phy_provider *phy_provider;
> > >> +	const struct of_device_id *of_id;
> > >> +	struct rockchip_dphy *priv;
> > >> +	struct regmap *grf;
> > >> +	struct phy *phy;
> > >> +	unsigned int i;
> > >> +	int ret;
> > >> +
> > >> +	if (!dev->parent || !dev->parent->of_node)
> > >> +		return -ENODEV;
> > >> +
> > >> +	if (platform_get_resource(pdev, IORESOURCE_MEM, 0)) {
> > >> +		dev_err(&pdev->dev, "Rockchip DPHY driver only suports rx\n");
> 
> You can replace pdev->dev with dev here and below.
> 
> s/rx/RX mode/ ?
> 
> > >> +		return -EINVAL;
> > >> +	}
> > >> +
> > >> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > >> +	if (!priv)
> > >> +		return -ENOMEM;
> > >> +	priv->dev = dev;
> > >> +
> > >> +	grf = syscon_node_to_regmap(dev->parent->of_node);
> > >> +	if (IS_ERR(grf)) {
> > >> +		grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> > >> +						      "rockchip,grf");
> > >> +		if (IS_ERR(grf)) {
> > >> +			dev_err(dev, "Can't find GRF syscon\n");
> > >> +			return -ENODEV;
> > >> +		}
> > >> +	}
> > >> +	priv->grf = grf;
> > >> +
> > >> +	of_id = of_match_device(rockchip_dphy_dt_ids, dev);
> > >> +	if (!of_id)
> > >> +		return -EINVAL;
> > >> +
> > >> +	drv_data = of_id->data;
> > >> +	priv->grf_regs = drv_data->regs;
> 
> Do you have to store grf_regs in priv, or could it be accessed through
> priv->drv_data->regs ?
> 
> > >> +	priv->drv_data = drv_data;
> > >> +	for (i = 0; i < drv_data->num_clks; i++)
> > >> +		priv->clks[i].id = drv_data->clks[i];
> > >> +	ret = devm_clk_bulk_get(&pdev->dev, drv_data->num_clks, priv->clks);
> > >> +	if (ret)
> > >> +		return ret;
> > >> +
> > >> +	phy = devm_phy_create(dev, np, &rockchip_dphy_ops);
> > >> +	if (IS_ERR(phy)) {
> > >> +		dev_err(dev, "failed to create phy\n");
> > >> +		return PTR_ERR(phy);
> > >> +	}
> > >> +	phy_set_drvdata(phy, priv);
> > >> +
> > >> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > >> +
> > >> +	return PTR_ERR_OR_ZERO(phy_provider);
> > >> +}
> > >> +
> > >> +static struct platform_driver rockchip_dphy_driver = {
> > >> +	.probe = rockchip_dphy_probe,
> > >> +	.driver = {
> > >> +		.name	= "rockchip-mipi-dphy",
> > >> +		.of_match_table = rockchip_dphy_dt_ids,
> > >> +	},
> > >> +};
> > >> +module_platform_driver(rockchip_dphy_driver);
> > >> +
> > >> +MODULE_AUTHOR("Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>");
> > >> +MODULE_DESCRIPTION("Rockchip MIPI Synopsys DPHY driver");
> > >> +MODULE_LICENSE("Dual MIT/GPL");
> 
> Overall this is quite good, there are only small issues.
> 
> 







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux