Jacek
Need your input below
On 8/8/19 3:32 PM, Oleh Kravchenko wrote:
Add documentation and example for dt-bindings EL15203000.
LED board (aka RED LED board) from Crane Merchandising Systems.
Signed-off-by: Oleh Kravchenko <oleg@xxxxxxxxxx>
---
.../bindings/leds/leds-el15203000.txt | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-el15203000.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
new file mode 100644
index 000000000000..4c2245babfdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
@@ -0,0 +1,47 @@
+Crane Merchandising System - el15203000 LED driver
+--------------------------------------------------
+
+This LED Board (aka RED LEDs board) is widely used in
+coffee vending machines produced by Crane Merchandising Systems.
+
+Required properties:
+- compatible : "crane,el15203000"
+- reg :
+ see Documentation/devicetree/bindings/spi/spi-bus.txt
+- spi-max-frequency : (optional)
+ see Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional LED sub-node properties:
+- label :
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+led-controller@0 {
+ compatible = "crane,el15203000";
+ reg = <0>;
+ spi-max-frequency = <50000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* water pipe */
+ pipe@50 {
+ reg = <0x50>;
+ label = "red:pipe";
Should we use the color and function property here?
Not sure what function would be for pipe, screen or vending but there may be
comparable functions that may fit.
Dan
<snip>
