On Mon, Aug 12, 2019 at 04:58:14PM +0530, Krishna Yarlagadda wrote:
> From: Shardar Shariff Md <smohammed@xxxxxxxxxx>
>
> FIFO reset/flush code implemented now does not follow programming
> guidelines. RTS line has to be turned off while flushing fifos to
> avoid new transfers. Also check LSR bits UART_LSR_TEMT and UART_LSR_DR
> to confirm fifos are flushed.
You use inconsistent spelling for FIFO here.
> Signed-off-by: Shardar Shariff Md <smohammed@xxxxxxxxxx>
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
> ---
> drivers/tty/serial/serial-tegra.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
> index ae7225c..f6a3f4e 100644
> --- a/drivers/tty/serial/serial-tegra.c
> +++ b/drivers/tty/serial/serial-tegra.c
> @@ -266,6 +266,10 @@ static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup,
> static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
> {
> unsigned long fcr = tup->fcr_shadow;
> + unsigned int lsr, tmout = 10000;
> +
> + if (tup->rts_active)
> + set_rts(tup, false);
>
> if (tup->cdata->allow_txfifo_reset_fifo_mode) {
> fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
> @@ -289,6 +293,17 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
> * to propagate, otherwise data could be lost.
> */
> tegra_uart_wait_cycle_time(tup, 32);
> +
> + do {
> + lsr = tegra_uart_read(tup, UART_LSR);
> + if (lsr | UART_LSR_TEMT)
> + if (!(lsr & UART_LSR_DR))
Can't both of these go on the same line?
Thierry
> + break;
> + udelay(1);
> + } while (--tmout);
> +
> + if (tup->rts_active)
> + set_rts(tup, true);
> }
>
> static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud)
> --
> 2.7.4
>
Attachment:
signature.asc
Description: PGP signature
