HI Vasily,
On Sat, Aug 10, 2019 at 2:17 PM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
>
> On Fri, Aug 9, 2019 at 10:31 PM Yangtao Li <tiny.windzz@xxxxxxxxx> wrote:
> >
> > H3 has extra clock, so introduce something in ths_thermal_chip/ths_device
> > and adds the process of the clock.
> >
> > This is pre-work for supprt it.
> >
> > Signed-off-by: Yangtao Li <tiny.windzz@xxxxxxxxx>
> > ---
> > drivers/thermal/sun8i_thermal.c | 17 ++++++++++++++++-
> > 1 file changed, 16 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> > index b934bc81eba7..6f4294c2aba7 100644
> > --- a/drivers/thermal/sun8i_thermal.c
> > +++ b/drivers/thermal/sun8i_thermal.c
> > @@ -54,6 +54,7 @@ struct tsensor {
> > };
> >
> > struct ths_thermal_chip {
> > + bool has_mod_clk;
> > int sensor_num;
> > int offset;
> > int scale;
> > @@ -69,6 +70,7 @@ struct ths_device {
> > struct regmap *regmap;
> > struct reset_control *reset;
> > struct clk *bus_clk;
> > + struct clk *mod_clk;
> > struct tsensor sensor[MAX_SENSOR_NUM];
> > };
> >
> > @@ -274,6 +276,12 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
> > if (IS_ERR(tmdev->bus_clk))
> > return PTR_ERR(tmdev->bus_clk);
> >
> > + if (tmdev->chip->has_mod_clk) {
> > + tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
> > + if (IS_ERR(tmdev->mod_clk))
> > + return PTR_ERR(tmdev->mod_clk);
> > + }
> > +
> > ret = reset_control_deassert(tmdev->reset);
> > if (ret)
> > return ret;
> > @@ -282,12 +290,18 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
> > if (ret)
> > goto assert_reset;
> >
> > - ret = sun50i_ths_calibrate(tmdev);
> > + ret = clk_prepare_enable(tmdev->mod_clk);
>
> You have to set rate of modclk before enabling it since you can't rely
> on whatever bootloader left for you.
>
> Also I found that parameters you're using for PC_TEMP_PERIOD, ACQ0 and
> ACQ1 are too aggressive and may result in high interrupt rate to the
> point when it may stall RCU. I changed driver a bit to use params from
> Philipp Rossak's work (modclk set to 4MHz, PC_TEMP_PERIOD is 7, ACQ0
> is 255, ACQ1 is 63) and it fixed RCU stalls for me, see [1] for
> details.
Why is the RCU stall happening, is it caused by a deadlock?
Can you provide log information and your configuration?
I am a bit curious.
Thx,
Yangtao
>
> [1] https://github.com/anarsoul/linux-2.6/commit/46b8bb0fe2ccd1cd88fa9181a2ecbf79e8d513b2
>
>
> > if (ret)
> > goto bus_disable;
> >
> > + ret = sun50i_ths_calibrate(tmdev);
> > + if (ret)
> > + goto mod_disable;
> > +
> > return 0;
> >
> > +mod_disable:
> > + clk_disable_unprepare(tmdev->mod_clk);
> > bus_disable:
> > clk_disable_unprepare(tmdev->bus_clk);
> > assert_reset:
> > @@ -395,6 +409,7 @@ static int sun8i_ths_remove(struct platform_device *pdev)
> > {
> > struct ths_device *tmdev = platform_get_drvdata(pdev);
> >
> > + clk_disable_unprepare(tmdev->mod_clk);
> > clk_disable_unprepare(tmdev->bus_clk);
> > reset_control_assert(tmdev->reset);
> >
> > --
> > 2.17.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
