H3 has extra clock, so introduce something in ths_thermal_chip/ths_device and adds the process of the clock. This is pre-work for supprt it. Signed-off-by: Yangtao Li <tiny.windzz@xxxxxxxxx> --- drivers/thermal/sun8i_thermal.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index b934bc81eba7..6f4294c2aba7 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -54,6 +54,7 @@ struct tsensor { }; struct ths_thermal_chip { + bool has_mod_clk; int sensor_num; int offset; int scale; @@ -69,6 +70,7 @@ struct ths_device { struct regmap *regmap; struct reset_control *reset; struct clk *bus_clk; + struct clk *mod_clk; struct tsensor sensor[MAX_SENSOR_NUM]; }; @@ -274,6 +276,12 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev) if (IS_ERR(tmdev->bus_clk)) return PTR_ERR(tmdev->bus_clk); + if (tmdev->chip->has_mod_clk) { + tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod"); + if (IS_ERR(tmdev->mod_clk)) + return PTR_ERR(tmdev->mod_clk); + } + ret = reset_control_deassert(tmdev->reset); if (ret) return ret; @@ -282,12 +290,18 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev) if (ret) goto assert_reset; - ret = sun50i_ths_calibrate(tmdev); + ret = clk_prepare_enable(tmdev->mod_clk); if (ret) goto bus_disable; + ret = sun50i_ths_calibrate(tmdev); + if (ret) + goto mod_disable; + return 0; +mod_disable: + clk_disable_unprepare(tmdev->mod_clk); bus_disable: clk_disable_unprepare(tmdev->bus_clk); assert_reset: @@ -395,6 +409,7 @@ static int sun8i_ths_remove(struct platform_device *pdev) { struct ths_device *tmdev = platform_get_drvdata(pdev); + clk_disable_unprepare(tmdev->mod_clk); clk_disable_unprepare(tmdev->bus_clk); reset_control_assert(tmdev->reset); -- 2.17.1