Report overrun/parity/frame/break errors to top tty layer. Add support to ignore break character if IGNBRK is set. Signed-off-by: Shardar Shariff Md <smohammed@xxxxxxxxxx> Signed-off-by: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx> --- drivers/tty/serial/serial-tegra.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index f6a3f4e..7ab81bb 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -374,13 +374,21 @@ static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup, tup->uport.icount.frame++; dev_err(tup->uport.dev, "Got frame errors\n"); } else if (lsr & UART_LSR_BI) { - dev_err(tup->uport.dev, "Got Break\n"); - tup->uport.icount.brk++; - /* If FIFO read error without any data, reset Rx FIFO */ + /* + * Break error + * If FIFO read error without any data, reset Rx FIFO + */ if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE)) tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR); + if (tup->uport.ignore_status_mask & UART_LSR_BI) + return TTY_BREAK; + flag = TTY_BREAK; + tup->uport.icount.brk++; + dev_err(tup->uport.dev, "Got Break\n"); } + uart_insert_char(&tup->uport, lsr, UART_LSR_OE, 0, flag); } + return flag; } @@ -562,6 +570,9 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, break; flag = tegra_uart_decode_rx_error(tup, lsr); + if (flag != TTY_NORMAL) + continue; + ch = (unsigned char) tegra_uart_read(tup, UART_RX); tup->uport.icount.rx++; @@ -1224,6 +1235,8 @@ static void tegra_uart_set_termios(struct uart_port *u, /* Ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) tup->uport.ignore_status_mask |= UART_LSR_DR; + if (termios->c_iflag & IGNBRK) + tup->uport.ignore_status_mask |= UART_LSR_BI; spin_unlock_irqrestore(&u->lock, flags); } -- 2.7.4