Hi Sakari, Andy,
From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Date: Sat, Aug 10, 2019 at 14:09:21
> On Fri, Aug 9, 2019 at 5:38 PM Sakari Ailus <sakari.ailus@xxxxxx> wrote:
> > On Tue, Jun 11, 2019 at 09:20:51PM +0200, Luis Oliveira wrote:
> > > Add the Synopsys MIPI CSI-2 controller driver. This
> > > controller driver is divided in platform functions and core functions.
> > > This way it serves as platform for future DesignWare drivers.
>
> > > +const struct mipi_dt csi_dt[] = {
> >
> > Make this static or use a common prefix that somehow resembles the name
> > name of the driver.
I will do it.
> >
> > > + {
> > > + .hex = CSI_2_YUV420_8,
> > > + .name = "YUV420_8bits",
> > > + }, {
> > > + .hex = CSI_2_YUV420_10,
> > > + .name = "YUV420_10bits",
> > > + }, {
> > > + .hex = CSI_2_YUV420_8_LEG,
> > > + .name = "YUV420_8bits_LEGACY",
> > > + }, {
> > > + .hex = CSI_2_YUV420_8_SHIFT,
> > > + .name = "YUV420_8bits_SHIFT",
> > > + }, {
> > > + .hex = CSI_2_YUV420_10_SHIFT,
> > > + .name = "YUV420_10bits_SHIFT",
> > > + }, {
> > > + .hex = CSI_2_YUV422_8,
> > > + .name = "YUV442_8bits",
> > > + }, {
> > > + .hex = CSI_2_YUV422_10,
> > > + .name = "YUV442_10bits",
> > > + }, {
> > > + .hex = CSI_2_RGB444,
> > > + .name = "RGB444",
> > > + }, {
> > > + .hex = CSI_2_RGB555,
> > > + .name = "RGB555",
> > > + }, {
> > > + .hex = CSI_2_RGB565,
> > > + .name = "RGB565",
> > > + }, {
> > > + .hex = CSI_2_RGB666,
> > > + .name = "RGB666",
> > > + }, {
> > > + .hex = CSI_2_RGB888,
> > > + .name = "RGB888",
> > > + }, {
> > > + .hex = CSI_2_RAW6,
> > > + .name = "RAW6",
> > > + }, {
> > > + .hex = CSI_2_RAW7,
> > > + .name = "RAW7",
> > > + }, {
> > > + .hex = CSI_2_RAW8,
> > > + .name = "RAW8",
> > > + }, {
> > > + .hex = CSI_2_RAW10,
> > > + .name = "RAW10",
> > > + }, {
> > > + .hex = CSI_2_RAW12,
> > > + .name = "RAW12",
> > > + }, {
> > > + .hex = CSI_2_RAW14,
> > > + .name = "RAW14",
> > > + }, {
> > > + .hex = CSI_2_RAW16,
> > > + .name = "RAW16",
> > > + },
> > > +};
>
> One may utilize __stringify() macro and do somelike
>
> #define CSI_FMT_DESC(fmt) \
> { .hex = CSI_2_##fmt, .name = __stringify(fmt), }
>
> And do
>
> CSI_FMT_DESC(RAW16),
>
> etc.
>
Great, thanks!
> > > + return cfg ? v4l2_subdev_get_try_format(&dev->sd,
> > > + cfg,
> > > + 0) : NULL;
>
> This indentation looks ugly.
> I would rather put this on one line.
>
> > > + dev_dbg(dev->dev,
> > > + "%s got v4l2_mbus_pixelcode. 0x%x\n", __func__,
> > > + dev->format.code);
> > > + dev_dbg(dev->dev,
> > > + "%s got width. 0x%x\n", __func__,
> > > + dev->format.width);
> > > + dev_dbg(dev->dev,
> > > + "%s got height. 0x%x\n", __func__,
> > > + dev->format.height);
>
> __func__ is usually redundant (if Dynamic Debug in use it can be
> switched at run-time).
>
That's true, I don't need it.
> > I'd just omit these debug prints in a driver. But adding them to the
> > framework might make sense. We don't have a lot of debug prints dealing
> > with user parameters in there. OTOH the common test programs largely do the
> > same already.
>
> I would rather see tracepoints instead of debug prints if we are
> talking about generic solution for entire framework.
>
I will check that.
> >
> > > + return &dev->format;
> > > +}
>
> > > + struct mipi_fmt *dev_fmt;
>
> This is simple bad name. We have dev_fmt() macro. I would rather avoid
> potential collisions.
True, I will change the name.
>
> > > + struct v4l2_mbus_framefmt *mf;
> > > +
> > > + mf = dw_mipi_csi_get_format(dev, cfg, fmt->which);
> > > + if (!mf)
> > > + return -EINVAL;
>
> Can't you rather return an error pointer in this and similar cases?
>
Yes, ofc.
> > > + dev_vdbg(dev->dev, "%s: on=%d\n", __func__, on);
>
> This is noise. If you would like to debug Function Tracer is a good start.
>
Ok.
> > > + of_id = of_match_node(dw_mipi_csi_of_match, dev->of_node);
> > > + if (!of_id)
> > > + return -EINVAL;
>
> Is it possible to have this asserted?
>
I will remove it.
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>
> > > + if (!res)
> > > + return -ENXIO;
>
> Redundant. Below does the check for you.
>
Yep, thanks.
> > > +
> > > + csi->base_address = devm_ioremap_resource(dev, res);
> > > + if (IS_ERR(csi->base_address)) {
>
> > > + dev_err(dev, "Base address not set.\n");
>
> Redundant. Above does print an error message for you.
>
Ok.
> > > + return PTR_ERR(csi->base_address);
> > > + }
>
> Moreover, use devm_platform_ioremap_resource() instead of both.
>
Nice, thanks.
> > > + csi->ctrl_irq_number = platform_get_irq(pdev, 0);
> > > + if (csi->ctrl_irq_number < 0) {
>
> > > + dev_err(dev, "irq number %d not set.\n", csi->ctrl_irq_number);
>
> Redundant since this cycle (v5.4).
>
Ok,
> > > + ret = csi->ctrl_irq_number;
>
> Better to do the opposite
>
> ret = platform_get_irq();
> if (ret)
> goto end;
> ... = ret;
>
> > > + goto end;
> > > + }
>
> > > + ret = devm_request_irq(dev, csi->ctrl_irq_number,
> > > + dw_mipi_csi_irq1, IRQF_SHARED,
> > > + dev_name(dev), csi);
> > > + if (ret) {
> > > + dev_err(dev, "irq csi %s failed\n", of_id->name);
> > > +
> > > + goto end;
> > > + }
>
> devm_*irq() might be a bad idea. Is it race free in your driver?
>
I never thought about it like that. Should I use request_irq and
free_irq?
> > > +static const struct of_device_id dw_mipi_csi_of_match[] = {
> > > + { .compatible = "snps,dw-csi" },
>
> > > + {},
>
> Better without comma. Terminator may terminate even at compile time.
>
Ok.
> > > +};
>
> > > +static ssize_t core_version_show(struct device *dev,
> > > + struct device_attribute *attr,
> > > + char *buf)
> > > +{
> > > + struct platform_device *pdev = to_platform_device(dev);
> > > + struct v4l2_subdev *sd = platform_get_drvdata(pdev);
> > > + struct dw_csi *csi_dev = sd_to_mipi_csi_dev(sd);
>
> > > +
> > > + char buffer[10];
> > > +
> > > + snprintf(buffer, 10, "v.%d.%d*\n", csi_dev->hw_version_major,
> > > + csi_dev->hw_version_minor);
> > > +
> > > + return strlcpy(buf, buffer, PAGE_SIZE);
>
> Oh, can't you simple without any temprorary useless buffers?
> sprintf(buf, ...)?
> (Yes, note _absence_ of *n* there)
You are right.
>
> > > +}
>
> > > +static ssize_t n_lanes_store(struct device *dev, struct device_attribute *attr,
> > > + const char *buf, size_t count)
> > > +{
> > > + int ret;
> > > + unsigned long lanes;
>
> > > +
>
> More blank lines! We need them!
>
Ok.
> > > + struct platform_device *pdev = to_platform_device(dev);
> > > + struct v4l2_subdev *sd = platform_get_drvdata(pdev);
> > > + struct dw_csi *csi_dev = sd_to_mipi_csi_dev(sd);
> > > +
> > > + ret = kstrtoul(buf, 10, &lanes);
> > > + if (ret < 0)
> > > + return ret;
>
> Can it return positive number?
>
> > > + dev_info(dev, "Lanes %lu\n", lanes);
>
> Noise.
> The user gets it, why to spam kernel log???
>
Ok.
> > > + csi_dev->hw.num_lanes = lanes;
> > > +
> > > + return count;
> > > +}
>
> I told once, can repeat again. Synopsys perhaps needs better reviews
> inside company. Each time I see the code, it repeats same mistakes
> over and over. Have you, guys, do something about it?
We are working on it. It will get better, sorry.
>
> --
> With Best Regards,
> Andy Shevchenko
Thanks,
Luis
