[PATCH 1/4] dt-bingings: PCI: Remove the num-lanes from Required properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>

The num-lanes is not a mandatory property, e.g. on FSL
Layerscape SoCs, the PCIe link training is completed
automatically base on the selected SerDes protocol, it
doesn't need the num-lanes to set-up the link width.

It has been added in the Optional properties. This
patch is to remove it from the Required properties.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
---
 Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 5561a1c060d0..bd880df39a79 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -11,7 +11,6 @@ Required properties:
 	     the ATU address space.
     (The old way of getting the configuration address space from "ranges"
     is deprecated and should be avoided.)
-- num-lanes: number of lanes to use
 RC mode:
 - #address-cells: set to <3>
 - #size-cells: set to <2>
-- 
2.17.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux