Hi Dongchun,
(Cc'ing Ben, too.)
On Thu, Aug 08, 2019 at 05:22:14PM +0800, dongchun.zhu@xxxxxxxxxxxx wrote:
> From: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
>
> Add device tree binding documentation for the ov8856 camera sensor.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/i2c/ov8856.txt | 41 ++++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.txt b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
> new file mode 100644
> index 0000000..96b10e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.txt
> @@ -0,0 +1,41 @@
> +* Omnivision OV8856 MIPI CSI-2 sensor
> +
> +Required Properties:
> +- compatible: shall be "ovti,ov8856"
> +- clocks: reference to the xvclk input clock
> +- clock-names: shall be "xvclk"
Could you add "clock-frequency" property here, please, and specify the
upper and lower limits?
> +- avdd-supply: Analog voltage supply, 2.8 volts
> +- dovdd-supply: Digital I/O voltage supply, 1.8 volts
> +- dvdd-supply: Digital core voltage supply, 1.2 volts
> +- reset-gpios: Low active reset gpio
> +
> +The device node shall contain one 'port' child node with an
> +'endpoint' subnode for its digital output video port,
> +in accordance with the video interface bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt.
> +The endpoint optional property 'data-lanes' shall be "<0 1 3 4>".
If you don't support lane reordering, then monotonically incrementing lane
numbers from 1 onwards are recommended.
Please also make the property mandatory.
> +
> +Example:
> +&i2c7 {
> + ov8856: camera-sensor@10 {
> + compatible = "ovti,ov8856";
> + reg = <0x10>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&clk_24m_cam>;
> +
> + clocks = <&cru SCLK_TESTCLKOUT1>;
> + clock-names = "xvclk";
> +
> + avdd-supply = <&mt6358_vcama2_reg>;
> + dvdd-supply = <&mt6358_vcamd_reg>;
> + dovdd-supply = <&mt6358_vcamio_reg>;
> + reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> +
> + port {
> + wcam_out: endpoint {
> + remote-endpoint = <&mipi_in_wcam>;
> + data-lanes = <0 1 3 4>;
> + };
> + };
> + };
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 783569e..7746c6b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11889,6 +11889,7 @@ L: linux-media@xxxxxxxxxxxxxxx
> T: git git://linuxtv.org/media_tree.git
> S: Maintained
> F: drivers/media/i2c/ov8856.c
> +F: Documentation/devicetree/bindings/media/i2c/ov8856.txt
>
> OMNIVISION OV9650 SENSOR DRIVER
> M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
--
Regards,
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx
