On Wed, 2019-08-07 at 12:51 +0200, Uwe Kleine-König wrote:
> On Wed, Aug 07, 2019 at 08:26:23AM +0000, Philippe Schenker wrote:
> > Add the phy-node and mdio bus to the fec-node, represented as is on
> > hardware.
> > This commit includes micrel,led-mode that is set to the default
> > value, prepared for someone who wants to change this.
> >
> > Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> > ---
> >
> > Changes in v3: None
> > Changes in v2: None
> >
> > arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > index 1beac22266ed..019dda6b88ad 100644
> > --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> > @@ -140,7 +140,18 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_enet>;
> > phy-mode = "rmii";
> > + phy-handle = <ðphy>;
> > status = "okay";
> > +
> > + mdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ethphy: ethernet-phy@0 {
> > + reg = <0>;
> > + micrel,led-mode = <0>;
>
> Doesn't that need a compatible entry to be actually used?
>
> Best regards
> Uwe
Hi Uwe and thanks for pointing this out. I just tried it and it works
fine without the compatible.
Philippe
> >
