On Wed, Aug 07, 2019 at 08:26:23AM +0000, Philippe Schenker wrote:
> Add the phy-node and mdio bus to the fec-node, represented as is on
> hardware.
> This commit includes micrel,led-mode that is set to the default
> value, prepared for someone who wants to change this.
>
> Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> arch/arm/boot/dts/imx6qdl-colibri.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 1beac22266ed..019dda6b88ad 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -140,7 +140,18 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enet>;
> phy-mode = "rmii";
> + phy-handle = <ðphy>;
> status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy: ethernet-phy@0 {
> + reg = <0>;
> + micrel,led-mode = <0>;
Doesn't that need a compatible entry to be actually used?
Best regards
Uwe
>
>
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
