[PATCH v8 2/4] dt-bindings: display: hdmi-connector: Support DDC bus enable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ondrej Jirman <megous@xxxxxxxxxx>

Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable
on-board voltage shifting logic for the DDC bus using a gpio to be able
to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to
model this.

Add binding documentation for optional ddc-en-gpios property.

Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/display/connector/hdmi-connector.txt     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
index 508aee461e0d..aeb07c4bd703 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
@@ -9,6 +9,7 @@ Optional properties:
 - label: a symbolic name for the connector
 - hpd-gpios: HPD GPIO number
 - ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing
+- ddc-en-gpios: signal to enable DDC bus
 
 Required nodes:
 - Video port for HDMI input
-- 
2.22.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux