Hello, This is the third and last batch of changes to support new Marvell CN9130 SoCs. The CN9130 is made of one AP807 and one internal CP115. There are three development boards that are made of this SoC: * CN9130-DB * CN9131-DB (with one additional modular CP115 compared to CN9130-DB) * CN9132-DB (with two additional modular CP115 compared to CN9130-DB) This series applies on top of the AP806 and AP807 clock series (see below) and will work only if applied on top of: * CP110 COMPHY: https://patchwork.kernel.org/cover/11067647/ * AP806 CPU clocks: https://patchwork.kernel.org/cover/11038577/ * AP807 clocks: https://patchwork.kernel.org/cover/11076435/ * CP115 pinctrl: http://patchwork.ozlabs.org/cover/1142107/ As CP110 and CP115 (alternatively, AP806 and AP807) are very similar, we first reorganize DT files to create CP11x (and AP80x) generic files, before including them from the new specific CP110/CP115 (AP806/AP807) ones. A few small improvements/fixes in these files are also carried. Thanks, Miquèl Ben Peled (1): dt-bindings: ap80x: replace AP806 with AP80x Grzegorz Jaszczyk (7): arm64: dts: marvell: Add AP806-dual cache description arm64: dts: marvell: Add AP806-quad cache description arm64: dts: marvell: Add AP807-quad cache description dt-bindings: marvell: Declare the CN913x SoC compatibles arm64: dts: marvell: Add support for Marvell CN9130-DB arm64: dts: marvell: Add support for Marvell CN9131-DB arm64: dts: marvell: Add support for Marvell CN9132-DB Konstantin Porotchkin (1): arm64: dts: marvell: Prepare the introduction of AP807 based SoCs Miquel Raynal (11): arm64: dts: marvell: Enumerate the first AP806 syscon arm64: dts: marvell: Add AP806-dual missing CPU clocks MAINTAINERS: Add new Marvell CN9130-based files to track arm64: dts: marvell: Move clocks to AP806 specific file arm64: dts: marvell: Add support for AP807/AP807-quad arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment arm64: dts: marvell: Prepare the introduction of CP115 arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file arm64: dts: marvell: Externalize PCIe macros from CP11x file arm64: dts: marvell: Add support for CP115 arm64: dts: marvell: Add support for Marvell CN9130 SoC support ...roller.txt => ap80x-system-controller.txt} | 14 +- .../bindings/arm/marvell/armada-7k-8k.txt | 13 +- MAINTAINERS | 3 +- arch/arm64/boot/dts/marvell/Makefile | 3 + arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 28 +- .../boot/dts/marvell/armada-8040-mcbin.dtsi | 3 +- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 56 +- .../boot/dts/marvell/armada-ap806-dual.dtsi | 23 + .../boot/dts/marvell/armada-ap806-quad.dtsi | 42 ++ arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 456 +------------- .../boot/dts/marvell/armada-ap807-quad.dtsi | 93 +++ arch/arm64/boot/dts/marvell/armada-ap807.dtsi | 29 + arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 444 ++++++++++++++ .../arm64/boot/dts/marvell/armada-common.dtsi | 4 +- arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 575 +----------------- arch/arm64/boot/dts/marvell/armada-cp115.dtsi | 12 + arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 568 +++++++++++++++++ arch/arm64/boot/dts/marvell/cn9130-db.dts | 403 ++++++++++++ arch/arm64/boot/dts/marvell/cn9130.dtsi | 37 ++ arch/arm64/boot/dts/marvell/cn9131-db.dts | 202 ++++++ arch/arm64/boot/dts/marvell/cn9132-db.dts | 221 +++++++ 21 files changed, 2161 insertions(+), 1068 deletions(-) rename Documentation/devicetree/bindings/arm/marvell/{ap806-system-controller.txt => ap80x-system-controller.txt} (91%) create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi create mode 100644 arch/arm64/boot/dts/marvell/armada-ap807.dtsi create mode 100644 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi create mode 100644 arch/arm64/boot/dts/marvell/armada-cp115.dtsi create mode 100644 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db.dts create mode 100644 arch/arm64/boot/dts/marvell/cn9130.dtsi create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db.dts create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db.dts -- 2.20.1
