Lx2160a platform, the i2c input clock is actually platform pll CLK / 16 (this is the hardware connection), other clock divider can not get the correct i2c clock, resulting in the output of SCL pin clock is not accurate. Signed-off-by: Chuanhua Han <chuanhua.han@xxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 4720a8e..408e0ec 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -485,7 +485,7 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -497,7 +497,7 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -508,7 +508,7 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -519,7 +519,7 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -530,7 +530,7 @@ reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -542,7 +542,7 @@ reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -553,7 +553,7 @@ reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -564,7 +564,7 @@ reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; -- 2.9.5
