Hi Olivier
On 8/1/19 9:46 AM, Olivier Moysan wrote:
Add DFSDM pins to stm32mp157c.
Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxx>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 39 +++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 9eaec9bf8cb8..f96a928cbc49 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -230,6 +230,45 @@
};
};
I use to only take pinconfig which are used in board. So please resend
with the "board patch".
regards
Alex
+ dfsdm_clkout_pins_a: dfsdm-clkout-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 13, AF3)>; /* DFSDM_CKOUT */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ dfsdm_clkout_sleep_pins_a: dfsdm-clkout-sleep-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* DFSDM_CKOUT */
+ };
+ };
+
+ dfsdm_data1_pins_a: dfsdm-data1-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, AF3)>; /* DFSDM_DATA1 */
+ };
+ };
+
+ dfsdm_data1_sleep_pins_a: dfsdm-data1-sleep-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, ANALOG)>; /* DFSDM_DATA1 */
+ };
+ };
+
+ dfsdm_data3_pins_a: dfsdm-data3-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 13, AF6)>; /* DFSDM_DATA3 */
+ };
+ };
+
+ dfsdm_data3_sleep_pins_a: dfsdm-data3-sleep-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 13, ANALOG)>; /* DFSDM_DATA3 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
