Fix/improve a few things for veyron fievel/tiger:
- move 'vccsys' regulator from tiger to fievel, both boards
have it (and tiger includes the fievel .dtsi)
- move 'ext_gmac' node below regulators
- fix GPIO ids of vcc5_host1 and vcc5_host2 regulators
- remove reset configuration from 'gmac' node, this is already done
in rk3288.dtsi
- fixed style issues of some multi-line comments
- switch 'vcc18_lcdt', 'vdd10_lcd' and 'vcc33_ccd' regulators off
during suspend
- no pull-up on the Bluetooth wake-up pin, there is an external
pull-up. The signal is active low, add the 'bt_host_wake_l'
pinctrl config
- move BC 1.2 pins up in the pinctrl config to keep 'wake only' pins
separate
- add BC 1.2 pins to sleep config
Fixes: 0067692b662e ("ARM: dts: rockchip: add veyron-fievel board")
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
arch/arm/boot/dts/rk3288-veyron-fievel.dts | 55 +++++++++++++---------
arch/arm/boot/dts/rk3288-veyron-tiger.dts | 7 ---
arch/arm/boot/dts/rk3288-veyron.dtsi | 4 ++
3 files changed, 38 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
index a9716fc3f50a..fd0ba7532cbb 100644
--- a/arch/arm/boot/dts/rk3288-veyron-fievel.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts
@@ -20,11 +20,11 @@
/delete-node/ bt-activity;
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
+ vccsys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vccsys";
+ regulator-boot-on;
+ regulator-always-on;
};
/*
@@ -41,7 +41,7 @@
vcc5_host1: vcc5-host1-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio5 RK_PC1 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hub_usb1_pwr_en>;
regulator-name = "vcc5_host1";
@@ -52,7 +52,7 @@
vcc5_host2: vcc5-host2-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hub_usb2_pwr_en>;
regulator-name = "vcc5_host2";
@@ -70,6 +70,13 @@
regulator-always-on;
regulator-boot-on;
};
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
};
&gmac {
@@ -83,13 +90,13 @@
phy-supply = <&vcc33_lan>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
- resets = <&cru SRST_MAC>;
- reset-names = "stmmaceth";
rx_delay = <0x10>;
tx_delay = <0x30>;
- /* Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
- * with a 30ms settling time. */
+ /*
+ * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low)
+ * with a 30ms settling time.
+ */
snps,reset-gpio = <&gpio4 RK_PB0 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
@@ -120,7 +127,8 @@
regulators {
/delete-node/ LDO_REG1;
- /* According to the schematic, vcc18_lcdt is for
+ /*
+ * According to the schematic, vcc18_lcdt is for
* HDMI_AVDD_1V8
*/
vcc18_lcdt: LDO_REG2 {
@@ -130,12 +138,13 @@
regulator-max-microvolt = <1800000>;
regulator-name = "vdd18_lcdt";
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
- /* This is not a pwren anymore, but the real power supply,
+ /*
+ * This is not a pwren anymore, but the real power supply,
* vdd10_lcd for HDMI_AVDD_1V0
*/
vdd10_lcd: LDO_REG7 {
@@ -145,7 +154,7 @@
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
@@ -159,7 +168,7 @@
regulator-max-microvolt = <3300000>;
regulator-name = "vcc33_ccd";
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
@@ -181,7 +190,7 @@
interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
marvell,wakeup-pin = /bits/ 16 <13>;
pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake>;
+ pinctrl-0 = <&bt_host_wake_l>;
};
};
@@ -207,13 +216,13 @@
&ddrio_pwroff
&global_pwroff
- /* Wake only */
- &bt_dev_wake_awake
- &pwr_led1_on
-
/* For usb bc1.2 */
&usb_otg_ilim_sel
&usb_usb_ilim_sel
+
+ /* Wake only */
+ &bt_dev_wake_awake
+ &pwr_led1_on
>;
pinctrl-1 = <
@@ -222,6 +231,10 @@
&ddrio_pwroff
&global_pwroff
+ /* For usb bc1.2 */
+ &usb_otg_ilim_sel
+ &usb_usb_ilim_sel
+
/* Sleep only */
&bt_dev_wake_sleep
&pwr_led1_blink
diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
index fae26d530841..27557203ae33 100644
--- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts
@@ -19,13 +19,6 @@
"google,veyron", "rockchip,rk3288";
/delete-node/ vcc18-lcd;
-
- vccsys: vccsys {
- compatible = "regulator-fixed";
- regulator-name = "vccsys";
- regulator-boot-on;
- regulator-always-on;
- };
};
&backlight {
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 8fc8eac699bf..7525e3dd1fc1 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -586,6 +586,10 @@
rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>;
};
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
/*
* We run sdio0 at max speed; bump up drive strength.
* We also have external pulls, so disable the internal ones.
--
2.22.0.709.g102302147b-goog
