Dne ponedeljek, 29. julij 2019 ob 18:24:28 CEST je Uwe Kleine-König
napisal(a):
> Hello,
>
> On Tue, Jul 30, 2019 at 12:09:40AM +0800, Chen-Yu Tsai wrote:
> > On Tue, Jul 30, 2019 at 12:07 AM Uwe Kleine-König
> >
> > <u.kleine-koenig@xxxxxxxxxxxxxx> wrote:
> > > On Mon, Jul 29, 2019 at 05:55:52PM +0200, Jernej Škrabec wrote:
> > > > Dne ponedeljek, 29. julij 2019 ob 08:40:30 CEST je Uwe Kleine-König
> > > >
> > > > napisal(a):
> > > > > On Fri, Jul 26, 2019 at 08:40:43PM +0200, Jernej Skrabec wrote:
> > > > > > --- a/drivers/pwm/pwm-sun4i.c
> > > > > > +++ b/drivers/pwm/pwm-sun4i.c
> > > > > > @@ -331,6 +331,13 @@ static const struct sun4i_pwm_data
> > > > > > sun4i_pwm_single_bypass = {>
> > > > > >
> > > > > > .npwm = 1,
> > > > > >
> > > > > > };
> > > > > >
> > > > > > +static const struct sun4i_pwm_data sun50i_pwm_dual_bypass_clk_rst
> > > > > > = {
> > > > > > + .has_bus_clock = true,
> > > > > > + .has_prescaler_bypass = true,
> > > > > > + .has_reset = true,
> > > > > > + .npwm = 2,
> > > > > > +};
> > > > > > +
> > > > > >
> > > > > > static const struct of_device_id sun4i_pwm_dt_ids[] = {
> > > > > >
> > > > > > {
> > > > > >
> > > > > > .compatible = "allwinner,sun4i-a10-pwm",
> > > > > >
> > > > > > @@ -347,6 +354,9 @@ static const struct of_device_id
> > > > > > sun4i_pwm_dt_ids[] =
> > > > > > {
> > > > > >
> > > > > > }, {
> > > > > >
> > > > > > .compatible = "allwinner,sun8i-h3-pwm",
> > > > > > .data = &sun4i_pwm_single_bypass,
> > > > > >
> > > > > > + }, {
> > > > > > + .compatible = "allwinner,sun50i-h6-pwm",
> > > > > > + .data = &sun50i_pwm_dual_bypass_clk_rst,
> > > > >
> > > > > If you follow my suggestion for the two previous patches, you can
> > > > > just
> > > > >
> > > > > use:
> > > > > compatible = "allwinner,sun50i-h6-pwm",
> > > > > "allwinner,sun5i-a10s-pwm";
> > > > >
> > > > > and drop this patch.
> > > >
> > > > Maxime found out that it's not compatible with A10s due to difference
> > > > in bypass bit, but yes, I know what you mean.
> > > >
> > > > Since H6 requires reset line and bus clock to be specified, it's not
> > > > compatible from DT binding side. New yaml based binding must somehow
> > > > know that in order to be able to validate DT node, so it needs
> > > > standalone compatible. However, depending on conclusions of other
> > > > discussions, this new compatible can be associated with already
> > > > available quirks structure or have it's own.> >
> > > I cannot follow. You should be able to specify in the binding that the
> > > reset line and bus clock is optional. Then allwinner,sun50i-h6-pwm
> > > without a reset line and bus clock also verifies, but this doesn't
> > > really hurt (and who knows, maybe the next allwinner chip needs exactly
> > > this).
> >
> > It is not optional. It will not work if either the clocks or reset
> > controls
> > are missing. How would these be optional anyway? Either it's connected and
> > thus required, or it's not and therefore should be omitted from the
> > description.
>
> [Just arguing about the clock here, the argumentation is analogous for
> the reset control.]
>
> From the driver's perspective it's optional: There are devices with and
> without a bus clock. This doesn't mean that you can just ignore this
> clock if it's specified. It's optional in the sense "If dt doesn't
> specify it, then assume this is a device that doesn't have it and so you
> don't need to handle it." but not in the sense "it doesn't matter if
> you handle it or not.".
>
> Other than that I'm on your side. So for example I think it's not
> optimal that gpiod_get_optional returns NULL if GPIOLIB=n or that
> devm_reset_control_get_optional returns NULL if RESET_CONTROLLER=n
> because this hides exactly the kind of problem you point out here.
>
I think there's misunderstanding. I only argued that we can't use
compatible = "allwinner,sun50i-h6-pwm",
"allwinner,sun5i-a10s-pwm";
as you suggested and only
compatible = "allwinner,sun50i-h6-pwm";
will work. Not because of driver itself (it can still use _optional()
variants), but because of DT binding, which should be able to validate H6 PWM
node - reset and bus clock references are required in this case.
Best regards,
Jernej
> Best regards
> Uwe
