Now that sun4i PWM driver supports deasserting reset line and enabling
bus clock, support for H6 PWM can be added.
Note that while H6 PWM has two channels, only first one is wired to
output pin. Second channel is used as a clock source to companion AC200
chip which is bundled into same package.
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
---
drivers/pwm/pwm-sun4i.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 7d3ac3f2dc3f..9e0eca79ff88 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -331,6 +331,13 @@ static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
.npwm = 1,
};
+static const struct sun4i_pwm_data sun50i_pwm_dual_bypass_clk_rst = {
+ .has_bus_clock = true,
+ .has_prescaler_bypass = true,
+ .has_reset = true,
+ .npwm = 2,
+};
+
static const struct of_device_id sun4i_pwm_dt_ids[] = {
{
.compatible = "allwinner,sun4i-a10-pwm",
@@ -347,6 +354,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
}, {
.compatible = "allwinner,sun8i-h3-pwm",
.data = &sun4i_pwm_single_bypass,
+ }, {
+ .compatible = "allwinner,sun50i-h6-pwm",
+ .data = &sun50i_pwm_dual_bypass_clk_rst,
}, {
/* sentinel */
},
--
2.22.0
