Ping... > Hi, Daniel/Rui/Eduardo > Could you please take a look at this patch series? > > Anson > > > From: Anson Huang <Anson.Huang@xxxxxxx> > > > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system > > controller, the system controller is in charge of system power, clock > > and thermal sensors etc. management, Linux kernel has to communicate > > with system controller via MU (message unit) IPC to get temperature > > from thermal sensors, this patch adds binding doc for i.MX system > > controller thermal driver. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx> > > --- > > No change. > > --- > > .../devicetree/bindings/arm/freescale/fsl,scu.txt | 16 > ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > index a575e42..fc3844e 100644 > > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > @@ -155,6 +155,17 @@ Required properties: > > Optional properties: > > - timeout-sec: contains the watchdog timeout in seconds. > > > > +Thermal bindings based on SCU Message Protocol > > +------------------------------------------------------------ > > + > > +Required properties: > > +- compatible: Should be : > > + "fsl,imx8qxp-sc-thermal" > > + followed by "fsl,imx-sc-thermal"; > > + > > +- #thermal-sensor-cells: See > > Documentation/devicetree/bindings/thermal/thermal.txt > > + for a description. > > + > > Example (imx8qxp): > > ------------- > > aliases { > > @@ -222,6 +233,11 @@ firmware { > > compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; > > timeout-sec = <60>; > > }; > > + > > + tsens: thermal-sensor { > > + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc- > > thermal"; > > + #thermal-sensor-cells = <1>; > > + }; > > }; > > }; > > > > -- > > 2.7.4